Often asked: How To Wax A Concrete Floor?

What is the best wax for concrete floors?

Cherry Wax provides excellent scuff and abrasion resistance for all types of interior flooring applications including stained concrete floors and epoxy floors. It’s superior resistance to traffic, yields a smooth polished look for months without maintenance.

How do you make a concrete floor shine?

Regular sweeping and weekly cleaning with a mop and mild solution of dish soap and water should help concrete keep its shine. Every few months, use a pressure washer to clean dirt and debris from crevices. Make sure the concrete can handle the high-pressured stream of water before you tackle the entire project.

How often should you wax concrete floors?

If your acid stain concrete floors were previously waxed, then you most likely need to apply a coat of Residential Floor Wax. Most residential floors should be re-waxed four times a year.

What does vinegar do to concrete?

Vinegar does not dissolve concrete itself but can degrade the cement that binds concrete together. As a weak, dilute acid, vinegar will cause only minor damage to concrete but can take the shine off polished surfaces. It can, however, be used to remove small amounts of cement from tools.

You might be interested:  Question: How To Lift A Sinking Concrete Slab?

What is the best way to clean concrete floors?

You’ll just use a mop and a bucket of water mixed with a mild cleaner. Don’t use ammonia, bleach or any highly acidic substance on polished or stamped floors. Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners.

Can you use Pine Sol on concrete floors?

You can use PineSol® Cleaners on most concrete floors. PineSol® Cleaners are concentrated formulas that you dilute for most jobs. For general concrete cleanup, use a 24 oz. bottle of PineSol® for 12 gallons of cleaning power.

How many coats of wax should you put on a floor?

Most wax finishes, like our Optimal Wet Look Floor Finish will cover approximately 2,000 square feet per gallon. Each finish is different, but most recommend 4 to 5 coats. For example, 1 gallon of Optimal would provide 5 coats on a 20′ x 20′ (400 ft²) room.

Can I use Mop and Glo on concrete floors?

Waxing Products and Concrete Flooring



Not all types of concrete flooring will benefit from this treatment, but high gloss polished flooring and some types of stained concrete flooring will. Do not use cheap wax-cleanser combination products, such as Mop-n-Glo and other products available at your local grocery store.

Can I wax a concrete floor?

Concrete Floor Wax. Many concrete contractors recommend applying a mop-down wax or floor finish to your decorative concrete floor after you seal it. This sacrificial wax coating not only makes the floor look nice, it also protects the surface from scuffs, scratches and grit.

You might be interested:  Often asked: How Remove Oil Stains From Concrete?

What is the best way to apply floor wax?

To apply, dampen a clean mop head. Pour the polish onto the mop and pour some of the polish directly on the floor. Spread the polish evenly to avoid bubbles in the liquid. Allow the polish to dry, and buff the floor with a clean towel, an electric polisher, or a terry cloth-covered sponge mop.

Can you seal concrete with wax?

The surface is too smooth for many film-building (topical) sealers to stick to. When concrete is polished to a gloss, only penetrating sealers, hardeners and wax can be used. Penetrating sealers are liquids that are applied to bare concrete, soak in, and then once wiped off and dried, are usually nearly invisible.

Can you use quick shine on concrete floors?

Yes, Quick Shine will provide a high gloss shine on any hard surface floor.

Leave a Reply

Your email address will not be published. Required fields are marked *