Often asked: How To Stain Concrete Floors Inside?

How much does it cost to stain concrete floors yourself?

How much does it cost to stain concrete floors yourself? DIY concrete staining costs between $0.30 per square foot and $0.40 per square foot.

Can I stain my concrete floor myself?

A stained concrete floor is a great and durable flooring option, and – good news! – staining one yourself is a surprisingly easy task (although you’ll want to avoid one major pitfall we fell into below).

How hard is it to stain concrete floors?

IS IT HARD TO STAIN CONCRETE? Overall, staining concrete can look like a simple process. However, it is important to keep in mind that while your stain is permanent, so are your mistakes.

Is it better to stain or paint concrete floors?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

What is the best finish for concrete floors?

Top Concrete Finishing Options

• Acid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish.
• Water-Based Stain.
• Fast Stain.
• Acrylic Sealer.
• Standard Epoxy.
• Metallic Epoxy.
• Terrazzo or Granite Epoxy.
• Quartz Sand Epoxy.

Is stained concrete flooring a good option?

Concrete floors are a great alternative to linoleum, carpet, wood, tile, stone or marble flooring. Concrete can be stained nearly any color, resurfaced in a variety of textures and finishes, or polished for a smooth, shiny look. Plus, concrete flooring is durable, long-lasting and easy to clean and maintain.

Can I apply concrete stain with a roller?

Use a roller with extension pole or a sprayer to apply concrete stain over the rest of the surface evenly. On exterior surfaces, you can apply a solvent-based, solid-color concrete sealer. These work similarly to stains by penetrating the concrete rather than coating it, making for a more durable finish than paint.

How long after staining concrete can you seal it?

Be sure and remove any residue left behind if using our acid stain, then apply sealer. Don’t seal too soon as there could be moisture in the floor and hazing can occur. A good rule of thumb is to wait 24 hours time after any water has been applied to the floor before sealing.

How long does stained concrete last?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

Can I stain old concrete?

Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.

When should concrete be stained?

Staining concrete is a great way to add color to an otherwise dull surface. The concrete staining process takes about 2 days, is moderately difficult and fairly affordable. New concrete should be fully cured before staining, which takes between 21 and 28 days.

Are stained concrete floors slippery?

Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.

How do you stain old concrete floors?

1. 6 Steps for How to Stain Concrete Floors.
2. STEP 1: Surface Preparation.
3. STEP 2: Tape Off Your Concrete Slab.
4. STEP 3: Test Stains Before Application.
5. STEP 4: Apply the Concrete Stain.
6. STEP 5: Allow Enough Drying Time.
7. STEP 6: Apply Concrete Sealant.

How do you clean stained concrete floors?

For stains, first try warm water and a soft (non-metal) scrub brush. Graduate to mild soap to strong soap, and finally adding ammonia. For stubborn stains, chemicals or degreasers may be needed. (These should only be used on plain concrete, not stained or polished surfaces.)