Often asked: How To Install Fence Post In Concrete?

How do you put fence posts in concrete?

Set the post into the hole and attach 2×4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.

Should fence posts be set in concrete?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.

How deep do concrete fence posts need to be?

The width of the post hole should be 3 times the width of diameter of the post. For example, if you are erecting a 6 foot high fence using 4 inch fence posts, the posts need to be 6 feet above the ground. 6 divided by 3 is 2, therefore the depth of the hole required is 2 feet.

You might be interested:  FAQ: How To Install Solid Hardwood Floors On Concrete?

How do you keep fence posts from rotting in concrete?

Caulk Around the Fence Post Base



Apply high-quality exterior acrylic latex caulk, or silicone specifically designed to adhere to concrete, at the base of the post.

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.

How long will wooden posts last in concrete?

Life expectancy of posts now is anywhere from 18 months to 5-7 years max. This then got me thinking that the 100mm x 200mm sleepers I had planned to use to create a bank for the stream – up ended vertically with 1/3 buried in the ground – probably won’t last too long either.

How many bags of concrete do I need for a 4×4 fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

How long will 4×4 post last in the ground?

The length of time that you can keep a treated post in the ground depends on a few different factors. Generally speaking, in the optimal conditions, it can last as long as 40 years. More commonly, though, it will last around 20 years.

You might be interested:  Question: Concrete How Much?

What size posts do I need for a 6ft fence?

If you’re setting wooden or concrete posts in concrete you’ll need 8ft (2.4m) posts for a 6ft (1.828m) fence – i.e. your posts are 2ft (0.6m) longer than the fence height. Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

Can I cut concrete fence posts?

You can, with care cut them at angle with a TS400 and good diamond blade. Paint the tops with bitumen paint or similar otherwise the rebar will corode and the concrete spall.

How long do concrete posts take to set?

How long does concrete take to set in a post hole? We would advise waiting at least four hours before any weight or pressure is applied to the posts or fence holes. For best results, you should wait at least 24 hours before you continue hole and fence construction.

Should I use 4×4 or 6×6 fence posts?

4×4 is perfect for these very standard fence dimensions. Normally 4×6 or 6×6 are needed for gates or extreme wind loads.

How long will a pressure treated post last in concrete?

A PT post will last a long time in concrete, maybe 5 to 10 years in soil alone. I suggest you embed the post in concrete, trowel a peak around the post so water runs off, and don’t let the PT post come in contact with the ground.

How many bags of quikrete do I need for a fence post?

When you’re installing a fence post, the amount of concrete you need will be calculated based on the diameter of your fence post and how high the post is above ground. Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place.

Leave a Reply

Your email address will not be published. Required fields are marked *