- 1 Can you screw into concrete fence posts?
- 2 How do you attach something to concrete without drilling?
- 3 What is the best concrete for fence posts?
- 4 How many bags of concrete do I need for a fence post?
- 5 Is 2 feet deep enough for fence posts?
- 6 What glue will stick to concrete?
- 7 How do you stick plywood to concrete?
Can you screw into concrete fence posts?
jonna said: You need to stay away from the edges as the steel rods are there, as long as you drill in the middle you should be fine. You can get drill bits which go through the concrete and bar..
How do you attach something to concrete without drilling?
A simple fix might include an adhesive or adhesive-baked hook, while there are other fasteners like hard wall hooks and masonry nails. Powder-actuated fasteners and concrete nail guns are useful for supporting frames and providing a much greater hold.
What is the best concrete for fence posts?
Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow. Once you’ve finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2×4.
How many bags of concrete do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
Is 2 feet deep enough for fence posts?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
What glue will stick to concrete?
SAKRETE Concrete Glue is a liquid latex bonding adhesive for bonding new concrete, mortar or gypsum plaster to existing surfaces.
How do you stick plywood to concrete?
One way to attach plywood to a concrete surface is to screw it into place with concrete fasteners. Another way that involves less strain and hard work is to glue the plywood to the concrete. This only requires a few materials and will adhere the plywood very securely in place.