How To Read Blueprints For Concrete?

How do you read a blueprint?

4 Tips for Reading Blueprints

  1. Begin with the title block. The title block is the first piece of information you’ll see in construction site plans.
  2. Study the plan legend.
  3. Find the blueprint’s scale and orientation.
  4. Look for notes from the architect.

What do symbols on blueprints mean?

Blueprint drawings—as applied to the building-construction industry—are generally used to show how a building, object, or system is to be constructed, implemented, modified, or repaired. One of the main functions of graphic symbols on construction drawings is to reference other drawings within the set.

How do you read floor plans?

How to read floor plans – essential information

  1. Compass mark. The compass mark shows which direction is north.
  2. Dimensions and scale. Look for the dimensions of the rooms of the floor plan.
  3. Furniture. Make sure there is a furniture layout on the plan.
  4. Walls.
  5. Windows.
  6. Doors.
  7. Entries.
  8. Stairs.

What does blueprint mean?

1: a photographic print in white on a bright blue ground or blue on a white ground used especially for copying maps, mechanical drawings, and architects’ plans. 2: something resembling a blueprint (as in serving as a model or providing guidance) especially: a detailed plan or program of action a blueprint for

You might be interested:  Readers ask: How To Replace A Broken Toilet Flange In Concrete?

What do blueprints include?

Blueprints also generally include four elevation drawings of a home, the front, the rear and each side. The purposes of these drawings are so that measurements can be taken for any necessary aspect and are drawn to scale and also indicate what the home will look like upon completion.

What does R mean on a blueprint?

The Feature is called out on the print as “R“, the customer insists this means “Full Radius”.

What are blueprints called now?

The term blueprint continues to be used less formally to refer to any floor plan (and even less formally, any type of plan). Practicing engineers, architects, and drafters often call them “drawings” or “prints”.

What does C mean on floor plans?

A/C – Air Conditioner.

How do you use hidden lines?

Hidden lines are used to show surfaces that are not directly visible. All surfaces must be shown in all views. If an edge or surface is blocked from view by another feature, it is drawn using a hidden line. Figures 4-11 and 4-12 show objects that require hidden lines in their orthographic views.

What does a hidden line look like?

A hidden line, also known as a hidden object line is a medium weight line, made of short dashes about 1/8” long with 1/16”gaps, to show edges, surfaces and corners which cannot be seen. Sometimes they are used to make a drawing easier to understand. Often they are omitted in an isometric view.

What do blueprints look like?

A complete set of blueprints will include a floor plan, elevation drawings of each side of the structure, basement or foundation plan, including footings and bearing walls, a complete electrical layout, a framing plan, drawings of all plumbing and mechanical systems, cross section drawings of structural elements, a

You might be interested:  Often asked: How To Use Concrete Forms?

How do I make a floor plan?

There are a few basic steps to creating a floor plan:

  1. Choose an area. Determine the area to be drawn.
  2. Take measurements. If the building exists, measure the walls, doors, and pertinent furniture so that the floor plan will be accurate.
  3. Draw walls.
  4. Add architectural features.
  5. Add furniture.

How do I find the floor plan for my house?

How to Get Floor Plans of an Existing House

  1. Talk to the contractor that built your house, if possible.
  2. Locate the archives of the municipality or county where your house is located.
  3. Locate the fire insurance maps for the community.
  4. Visit your local building inspector’s office.
  5. Browse through historical plan books.

Leave a Reply

Your email address will not be published. Required fields are marked *