What To Do With A Concrete Slab Patio?

How do you dispose of a concrete patio?

“Most concrete patios are un-reinforced, meaning that there is no rebar. So, in that case, a jackhammer is the best method to break the concrete into smaller pieces that can be shoveled away. If the area is very small, and the concrete is already cracked, a sledgehammer could also get the job done.”

What is the cheapest way to cover a patio?

Quick List of Expenses

1. #1: Buy a shade sail or shade cloth.
2. #2: Wood frame with a translucent cover.
3. #3: Build a Palapa.
4. Build a concrete patio cover that you love.

Can you resurface a concrete patio?

Concrete patios with minor damage, but in otherwise good condition, can be transformed with concrete resurfacing. Instead of starting over with a new patio, you can upgrade its appearance and strength with a cement-based overlay. Your resurfaced concrete patio can be stamped, stained, or stenciled and have color added.

How much does a 20×20 concrete patio cost?

Cost to Install Concrete Patio by Size

Size in Feet	Square Footage	Price Range
12×14	168	$1,400 – $4,000
15×15	225	$1,800 – $5,500
16×18	288	$2,300 – $7,200
20×20	400	$3,000 – $10,000

Is it better to paint or stain concrete patio?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

Can I grow grass over concrete?

if you can get a foot of soil down it’ll grow ok. you will have to water it very often as moisture will evaporate away quick in the summer. and you’ll have to feed it as it cant draw nutrients from deep down. will make one highrise lawn. suggest you get breaking the concrete up.

What is the best tool for breaking up concrete?

Tool #1: Sledgehammer + Pry Bar



When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.

What can I cover my concrete patio with?

You can‘t turn back time on spalling or cracks, but you can cover them up with the right concrete repair products. For example, a layer of Quikrete’s Re-Cap Concrete Resurfacer will give your patio a smooth and wear-resistant finish with the look of freshly poured concrete, but with a shorter working and wait time.

How can I cover my patio with a tarp?

Adding a tarpaulin, or tarp, over a patio is as simple as using a few grommets, eye-bolt screws and cord. The tarp can extend from the house’s eaves to a nearby fence to cover the patio. As long as the tarp is lashed tightly, so wind can’t tear its grommets, your patio shade will last at least one season.

Should you leave patio cushions outside?

Outdoor fabrics, such as Sunbrella®, are moisture, mildew and fade resistant. Generally, this means if you leave the cushions uncovered during a rainstorm, the rain will bead up and roll off. Should cushions be left out in the rain, as soon as it stops, shake or wipe off excess water and let them air out a bit.

How much does it cost to resurface concrete patio?

Nationally, the average cost for concrete resurfacing is $3 to $10 per square foot, depending on the condition of the original concrete and local labor costs. For smaller projects, some contractors charge a flat fee of at least $500 to $1,000. The new concrete must also be sealed, which costs $20 to $80 per gallon.

How do you update an old concrete patio?

Take a look at all of these fabulous concrete patio ideas.

1. Paint a Pattern. Yes, you can paint your concrete slab.
2. Lay Decking Flooring. Did you know you can lay decking over a concrete slab?
3. Add Curves With Pavers.
4. Lay Slate Tiles.
5. Stain the Concrete to Look Like Tile.
6. Add a Beautiful Outdoor Rug.
7. Paint Concrete.
8. Dress it Up.

Can I pour concrete over old concrete?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.