What Cleans Concrete Floors?

How do you clean unsealed concrete floors?

How to Clean Unsealed Concrete Floors

1. Sprinkle sawdust on grease and oil stains.
2. Sweep the floor with a push broom.
3. Dust mop or vacuum the floor.
4. Apply detergent and water on the stains.
5. Scrub the stained spots with a brush.
6. Mop with a baking soda solution.
7. Rinse and wipe the floor dry.

What is the best chemical to clean concrete?

Five Concrete Cleaning Products To Use

1. Soda. Soda can be used to remove grease stains.
2. Detergent. This is recommended for smaller grease spills.
3. Vinegar and Baking Soda. Cleaning concrete with vinegar or baking soda is a good option if you are looking for a natural cleaner.
4. Concrete Cleaner or Degreaser.
5. Bleach.

What can I use to clean concrete?

Mix 1/2 cup baking soda to one gallon of water for a gentle cleaning solution. Add 1/8 cup of liquid dish detergent. Spray on patio surface, let sit for 30 minutes, then scrub and rinse. For heavily stained or mildewed patios, you may need a pressure washer.

How can I make my concrete white again?

Apply vinegar or bleach to the discolored areas. If you use vinegar, do not dilute it. Pour it onto the concrete and scrub it into the surface with a scrub brush. If the discoloration starts to fade, repeat until it disappears completely.

Does white vinegar clean concrete?

Yes. Vinegar makes a great cleaner for stained concrete floors. Because of its acidity, you should dilute it 50/50 with warm water to avoid damaging the floors. However, you can use small amounts of full-strength vinegar for touch stains, followed by a quick water rinse.

Can vinegar clean concrete floors?

A natural, all-purpose cleaner, white vinegar is one of the best ways to clean concrete, especially if your floor has stubborn stains caused by mildew or grease. Vinegar also works as a phenomenal spot treatment and stain remover.

Does bleach clean concrete?

Concrete floors are commonly used in basements, patios and garages. Since these areas are prone to dirt, residue, mold or mildew, you should clean them with bleach. Bleach effectively removes many stains, deodorizes and kills mold and mildew when used properly.

Will straight bleach harm concrete?

When applied to concrete, bleach does not harm the sturdy material. It also disinfects concrete. When using bleach, work in a well-ventilated area because the fumes from bleach can be overwhelming. Depending on your cleaning project, you might combine the bleach with detergent, dilute it with water or use it straight.

What does vinegar do to concrete?

Vinegar does not dissolve concrete itself but can degrade the cement that binds concrete together. As a weak, dilute acid, vinegar will cause only minor damage to concrete but can take the shine off polished surfaces. It can, however, be used to remove small amounts of cement from tools.

Can Simple Green Clean concrete?

You can use Simple Green Oxy Solve Concrete and Driveway Cleaner to clean a concrete patio with or without a pressure washer. It removes oil, grease, grime and most stains and discolorations. Its biodegradable formula is safe for lawns and pets.

Can you use Pine Sol on concrete floors?

You can use Pine–Sol® Cleaners on most concrete floors. Pine–Sol® Cleaners are concentrated formulas that you dilute for most jobs. For general concrete cleanup, use a 24 oz. bottle of Pine–Sol® for 12 gallons of cleaning power.

Can you make old concrete look new?

The Easy Way to Make Old Concrete Look New!

Do-it-yourselfers and contractors can use QUIKRETE® Concrete Resurfacer for large applications such as driveways, walkways, sidewalks and patios.

Does peroxide clean concrete?

Cleaning concrete outdoors: you can rent a pressure washer for use in combination with a biodegradable detergent. Cleaning concrete indoors: your supplies are likely to be a bucket, scrub brush, and detergent. Hydrogen peroxide or ammonia also work well too.

Is Power Washing bad for concrete?

The quick answer is yes, power washing can degrade a concrete surface. The top reasons for pressure washing damage are using the wrong nozzle, excessive pressure, spraying too close to a concrete surface and holding the nozzle on a particular spot for too long.