Stamped Concrete Stain?

What is the best concrete stain?

6 Best Concrete Stains

1. Kemiko Stone Tone Concrete Stain. View Deal.
2. User & Eco-Friendly Semi-Transparent Professional Grade Cement Stain. View Deal.
3. Acid Stain DIY Kit with 100% Acrylic Solvent Sealer.
4. VIVID Acid Stain – 1 Gal – Walnut.
5. TuffCrete Waterborne Acrylic Concrete Stain Paint.
6. Rust-Oleum 247162 Concrete Stain Spray.

How much does it cost to stamp and stain concrete?

Stamped Concrete Cost. Basic stamped concrete costs between $8 and $12 per square foot, but more involved projects can be as expensive as $18 per square foot. How much you’ll pay for stamped concrete varies widely, depending on the prices for materials and labor in your local market and the complexity of the job.

How do you stain and seal stamped concrete?

Spray the stamped concrete with an acid-based concrete stain. Use a broom to spread the stain evenly across the surface and into the detail areas of the stamped design. Use a light coating of stain if the existing stain is barely faded. Apply heavier layers of stain to achieve darker color on the concrete.

Is it OK to power wash stamped concrete?

Never use a pressure washer to clean your stamped concrete. Over time the high pressure breaks down the sealer and reduces the protection, the shine and expected life of the sealer. Always use a gentle cleaner when washing stamped concrete.

Why does stamped concrete turn white?

Why is my concrete turning white? Efflorescence – As the concrete dries and its moisture rises upwards through the slab, it brings salts within the concrete to the surface as well. This leaves a white sticky residue called “efflorescence” when too much moisture passes through the concrete.

Is it better to stain or paint concrete?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

How much will a gallon of concrete stain cover?

More porous concrete will result in a lower coverage rate and thus more stain will be required. On average, acid stains will cover 200 to 400 square feet per gallon, while water based stains will cover slightly more at about 250 to 450 square feet per gallon.

How long does stained concrete last outside?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

What happens if you don’t seal stamped concrete?

An unsealed, decorative stained concrete surface will show faded colors in a matter of a few months. You could advise your customer that’s what happens with an unsealed project and let them make the decision about sealing, but rest assured that an “I told you so,” from you when the fading happens will not comfort them.

How much does a 20×20 stamped concrete patio cost?

The average cost for a stamped concrete is $5 to $12 per square foot, not including the concrete slab which costs $2 – $7 per square foot. Most homeowners spend a total of between $3,751 – $8,540 for stamped concrete patio. Get free estimates from concrete pros near you.

Does stamped concrete add value?

By stamping concrete with the look of expensive stone, such as brick, cobblestones, or slate, you are able to add significant visual improvement with increased cost savings. Pavers. Although slightly more expensive than stamped concrete, brick paver patios allow for a timeless look and increased resale value.

Can I Restain my stamped concrete?

You can stain new stamped concrete before it has been sealed, with no problem. The process of staining stamped concrete is the same as any other concrete: clean and prep your stamped concrete, apply the stain, neutralize the stain, and apply concrete sealer and concrete floor wax once the acid stain has dried.

How do you remove color from stamped concrete?

If you need to remove more color, try using a very dilute acid (40 parts water to 1 part muriatic acid). Spray down the dilute acid, covering small sections of the slab at a time, then scrub it in with a brush and rinse with soapy water.

Can you Restain stamped concrete a different color?

Recoloring it with concrete colors can quickly revive the look of stamped concrete. Generally, stamped concrete has natural colored highlights and is not one uniform color, therefore a stain should be used to recolor the concrete to achieve a natural rich look.