Readers ask: Where Can I Buy Acid Stain For Concrete?

What is the best acid stain for concrete?

6 Best Concrete Stains

• Kemiko Stone Tone Concrete Stain.
• User & Eco-Friendly Semi-Transparent Professional Grade Cement Stain.
• Acid Stain DIY Kit with 100% Acrylic Solvent Sealer.
• VIVID Acid Stain – 1 Gal – Walnut.
• TuffCrete Waterborne Acrylic Concrete Stain Paint.
• Rust-Oleum 247162 Concrete Stain Spray.

How much is concrete acid stain?

How Much Does it Cost to Stain Concrete? The cost of stained concrete can vary greatly. For a basic application of a single stain color with sealer and minimal surface prep, most decorative concrete contractors charge between $2 and $4 per square foot. As the complexity of the job rises, so will the price.

What is the difference between concrete stain and acid stain?

Acid-based concrete stains are made up of inorganic metallic salts dissolved in an acid and water solution. They penetrate into the surface and react chemically with the concrete to form a permanent bond. The key difference is that no chemical reaction takes place, so the color is more consistent.

Can you acid stain old concrete?

The answer is: yes, you can acid stain old concrete. The process for acid staining old concrete is not all that different from staining new concrete with a few exceptions. Below, we will walk you through how to stain old concrete and the differences from how to stain new concrete.

What is better concrete dye or stain?

Dyes contain very fine color pigments, much smaller than stains. They are solutions, similar to ink, and can easily penetrate into tight concrete. Most are water-based but there also are solvent-based dyes, usually with acetone or alcohol.

How long do I leave acid stain on concrete?

Drying time(final coat)- 4 hours minimum to overnight to 24 hours. Neutralizing and Cleaning the Residue from the Acid Stain will take one neutralizing and rinsing twice. Allow to completely dry for Clear Shield water base sealers.

Do you have to acid wash concrete before staining?

Schmidt also warns against acid etching of floors before staining. A lot of people think they need to acid etch the concrete like they do before applying a paint or coating, to get the paint to adhere. But acid washing depletes the lime content, which is what the minerals in the acid stain react with.

Is staining concrete cheaper than tile?

Staining a concrete floor typically costs less than tiling. Installing ceramic or porcelain tile costs on average between $15 and $20 per square foot.

What is the difference between concrete stain and epoxy?

The biggest difference between an epoxy floor and an epoxy paint is the depth in which it is applied. The result is not opaque like the concrete stain, so it has more of a finished floor appearance. Most epoxy floors are installed directly over your existing concrete floor.

Do you have to seal concrete after staining?

After allowing the stained concrete to dry overnight or longer, apply your sealer of choice. Most stain manufacturers recommend applying two coats of sealer for optimum durability.

How do you apply water based stain to concrete?

Discover how to apply a stain properly to ensure a rich, even color that lasts a long time.

1. Wash the concrete.
2. Wait for the concrete to dry thoroughly.
3. Mix the water–based concrete stain.
4. Spray the concrete with the stain.
5. Allow the stain to set and dry for 12 hours.
6. Seal the stain.

How do you fix acid stains on concrete?

You can use a mild acid to remove some of the color. A solution of 40 parts water to 1 part muriatic acid, a scrub brush and cotton rags will help remove the stain. Keep in mind that acid stains are not soluble in water. This means that water alone will not do much in regard to removing the orange-colored stain.

Is it hard to acid stain concrete?

While the process for how to acid–stain concrete is fairly straightforward, each step should be performed carefully before going on to the next step. Concrete should be fully cured before applying acid stain, so if your surface is new, wait a minimum of 14 days before staining.

Can you acid stain broomed concrete?

Acid staining is okay on a broomed surface. However, it will look best if the broomed finish is subtle, not aggressive. However, this will get you around the use of this product and ensure that your acid stain can properly react with the concrete surface.

How long after staining concrete can you seal it?

Be sure and remove any residue left behind if using our acid stain, then apply sealer. Don’t seal too soon as there could be moisture in the floor and hazing can occur. A good rule of thumb is to wait 24 hours time after any water has been applied to the floor before sealing.