Readers ask: What Stains Concrete?

What is the best concrete stain?

6 Best Concrete Stains

  1. Kemiko Stone Tone Concrete Stain. View Deal.
  2. User & Eco-Friendly Semi-Transparent Professional Grade Cement Stain. View Deal.
  3. Acid Stain DIY Kit with 100% Acrylic Solvent Sealer.
  4. VIVID Acid Stain – 1 Gal – Walnut.
  5. TuffCrete Waterborne Acrylic Concrete Stain Paint.
  6. Rust-Oleum 247162 Concrete Stain Spray.

What colors can you stain concrete?

MOST POPULAR CONCRETE STAIN COLORS

  • Grey concrete stain.
  • Black concrete stain.
  • White concrete stain.
  • Blue concrete stain.
  • Brown concrete stain.
  • Red concrete stain.
  • Terracotta concrete stain.
  • Charcoal concrete stain.

Can old concrete be stained?

Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.

What causes brown stains on concrete?

If water has a high iron or mineral content, or if the water is carrying leaves or dirt, it can leave behind iron or rust colored stains, or dark spots on the concrete. The most common way to remove discoloration caused by water is to use a heated pressure washer, or acid rinse.

You might be interested:  Quick Answer: What Is Compressive Strength Of Concrete?

Is it better to stain or paint concrete?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

How long does concrete stain last?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

Does concrete stain need to be sealed?

Add a Protective Coat of Sealer



After allowing the stained concrete to dry overnight or longer, apply your sealer of choice. Most stain manufacturers recommend applying two coats of sealer for optimum durability.

How much does a gallon of concrete stain cover?

On average, acid stains will cover 200 to 400 square feet per gallon, while water based stains will cover slightly more at about 250 to 450 square feet per gallon.

How do you apply stain to concrete?

How to Apply Concrete Stain

  1. protect brickwork with plastic wrap. Wash the Area. Pressure wash the area.
  2. apply stain with plastic garden sprayer. Apply the Stain.
  3. hose down area to remove residue. Add a Second Coat.
  4. use a gloss finish water based sealer. Apply the Sealer.

How do you prepare old concrete for staining?

  1. Apply Concrete Cleaner and Degreaser: The vast majority of concrete slabs only require minimum cleaning using an organic degreaser diluted at a medium concentration with water.
  2. Scrub Surface: Clean the surface with a soft nylon bristle brush or power wash on a low setting to prepare most floors for staining.
You might be interested:  Quick Answer: White Concrete Minecraft?

How do you match concrete to old concrete?

Some contractors use one or more muriatic acid washes to artificially weather concrete. Others suggest first etching the surface, then washing it with a mixture of carbon black and water. A third alternate is using a diluted black or brown concrete stain to darken the color.

Is stained concrete slippery?

Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.

Does OxiClean clean concrete?

The active ingredient in OxiClean is sodium percarbonate, a powder that, when mixed with water, releases hydrogen peroxide and soda ash. The powder mixes best into warm-to-hot water. Mop that onto the walkway and wait five to 30 minutes. During that time, you can scrub the concrete to make the cleaning more effective.

How do you remove brown stains from concrete?

Answer:

  1. Use a pressure washer to remove all solid leaf matter or debris from the concrete.
  2. Apply an organic detergent (as recommended above) to damp concrete. Let it sit for a few minutes.
  3. Scrub vigorously with a stiff broom or scrub brush.
  4. Rinse the concrete with water until you remove all the soap.

How do you get rid of rust stains on concrete?

Steps for removing rust on concrete:

  1. Pour the lemon juice and/or white vinegar directly onto the stain.
  2. If combining both liquids, use a 1:1 ratio.
  3. Leave the solution on the concrete from 10 to 20 minutes.
  4. Vigorously brush the rust stain with the hard-bristle brush.
  5. Rinse the area with clean, cold water.

Leave a Reply

Your email address will not be published. Required fields are marked *