Readers ask: Repainting Concrete Porch?

How do you paint over painted concrete?

How to Paint Concrete

1. STEP 1: Patch gouged or otherwise damaged areas with concrete filler.
2. STEP 2: Clean the concrete surface with TSP.
3. STEP 3: Let the surface dry thoroughly before you begin to paint the concrete.
4. STEP 4: Brush paint onto the perimeter of the concrete.
5. STEP 5: Roll on more paint to cover the interior.

Can you paint over painted concrete patio?

Coat all areas of bare concrete with a suitable primer, such as Behr Concrete & Masonry Bonding Primer. That needs to cure at least eight hours. Then you can paint with a product designed for exterior concrete, such as Behr Premium Plus Porch & Patio Floor Paint.

What kind of paint do you use on already painted concrete?

Paint the Concrete. Masonry paint (also called elastomeric paint or elastomeric wall coating) is a good choice for concrete painting because it contains binders that contract and expand with the concrete. Exterior house paint can crack and peel on concrete.

Can you paint over a painted porch?

If your porch is covered with old paint, you‘ll need to remove that before applying a new coat. Use an orbital sander to sand the old paint off the surface of the porch. You can also use paint scrapers to get some of the old paint off. Wear a respirator when operating the sander to protect your lungs from debris.

What is the best paint for outdoor concrete?

• Best overall: Rust-Oleum Decorative Concrete Coating.
• Best for your budget: Kilz Decorative Concrete Coating.
• Most weather resistant: In The Swim Patio And Deck.
• Best for your driveway: Rust-Oleum EpoxyShield professional floor coating kit.

How long does painted concrete last?

Here at Anderson Painting, we apply Penntek polyurea concrete coatings, which offer a 15-year warranty — these treatments can last 20-30 years on average, too. Two-part epoxy coatings can also hold up several decades, and so can acrylic, latex, and urethane.

Do I need to prime concrete before painting?

Generally speaking, priming is so essential to successful painting outcomes, concrete will always needs a primer. However, the existing surface needs to be primed before painting if: It is unpainted. It is peeling.

How do you prep a concrete patio for painting?

Begin applying primer by using a paint brush on the corners and edges of the concrete floor or surface. Use a paint roller to apply primer throughout the floor. Two coats of primer are recommended for best results. Allow the primer to dry for at least two hours after each coat.

Is it better to paint or stain concrete patio?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

Can I paint over old concrete paint?

Allow the concrete surface to dry. Existing paint needs to be scraped and sanded. Scrape any areas with loose or flaking paint, and lightly sand using fine (120 grit) sandpaper. Lightly sand intact areas of paint as well to give them the grit needed to receive new paint.

Can I paint over a painted garage floor?

As long as the existing floor coating is still bonded to the floor well and not peeling up over the majority of the floor you can use this primer over it. More than likely if you applied a water based or low solids epoxy coating to your floor it is now peeling up and you have bare spots.

How do you paint over peeling paint on concrete?

Remove all peeling paint and sand rough edges smooth. Sand to remove loose wood fibers if present. Make sure surface is clean, dull and dry. Prime with appropriate primer and recoat with a high quality paint.

Can I just paint over old paint?

How Do I Paint Over Painted Walls? If the wall is in good condition and the paints are chemically the same (both latex, for instance), you have a few options when the new paint is the opposite shade of the old paint. You can use a primer to thoroughly cover the old color, then apply 1 or 2 coats of the new paint.

How do I repaint my porch?

Renew Your Porch

1. Step 1: Prep the Surface. Before you start working, you’ll need to take everything off your porch.
2. Step 2: Etch the Surface (For Concrete)
3. Step 3: Use a Primer.
4. Step 4: Choose a Paint.
5. Step 5: Start Painting.
6. Step 6: Clean Up.

Do I need to sand my porch before painting?

Sanding is one of the most important steps in the preparation process. During the sanding process, you need to remove all of the old paint, stains, and other residue from the wooden boards. You want to expose almost all bare wood and get rid of anything in the way.