Readers ask: Is Polished Concrete Slippery?

How do you make polished concrete less slippery?

Here are a few tips:

  1. Keep the floor clean.
  2. Use rubber backed carpet rugs.
  3. Apply a concrete sealer with glass beads or sand for added grip.
  4. Mop on an anti-slip concrete coating such as SlipDoctors Polish Grip.

Is polished concrete water resistant?

Firstly, polished concrete floors are waterproof. Our grind and seal process creates a shiny, reflective and protective surface which cannot absorb water (like carpet or wood) or become discoloured (like stone or bare tiles). This makes for easy clean up – from a spill to a storm!

Can you use polished concrete in a bathroom?

Polished concrete can look nice in bathrooms – there’s no grout so it gives a very clean look. It’s easy to slip on a highly polished floor when wet though, so you need a finish with extra sanding to give it some texture,’ says the renovation specialist.

Is polished concrete expensive?

While there is no one set price you can usually expect prices to range between $65 – $140 per square meter depending on the desired finish (e.g. grind & seal or mechanical polish) Compared to other floor finishes on the market, Polished Concrete is a cost-effective option, however you’ll find prices vary depending on a

You might be interested:  How To Clean Concrete Patio Pavers?

Is polished concrete cheaper than tile?

Polished concrete is less expensive per square foot than carpeting, tiles, linoleum or any other forms of floor covering. This makes polished concrete a particularly good alternative for businesses that can’t afford marble or granite floors but want the same brilliant, mirror-like finish.

How long does polished concrete last?

Polished Concrete Floor Lifespans



With professional concrete installation, a proactive polished concrete floor maintenance plan, and occasional deep cleaning, a polished concrete flooring system can last 20 years or more with minimal hassle.

Should you seal polished concrete?

While small-scale pits or imperfections refract light, highly polished concrete reflects it. Ideally, polished concrete should be scratch-free and have a surface texture without abrasion points. Therefore, these properly polished floors would not rely upon a sealant to produce its gloss.

How do you waterproof a concrete floor?

When faced with damp in concrete floors, there are two options available:

  1. Dig up the old concrete floor, install a new damp proof membrane and lap up edges before replacing the concrete slab.
  2. Fully isolate the dampness in the floor using a surface Damp Proof Membrane (DPM)

Do you have to waterproof a concrete bathroom floor?

If the bathroom floor is either concrete or compressed fibre cement sheet flooring then there is no requirement for full waterproofing of the floor and the extent of floor waterproofing will depend on whether it has a bath with a shower over it or the shower recess is enclosed with a shower screen.

Are concrete floors bad for your health?

According to experts, concrete floor systems can cause everything from bunions and ingrown toenails to shin splints, lumbar strain, and achilles tendonitis. It can also lead to lower back pain, stress fractures, knee pain, and worsening of arthritis symptoms.

You might be interested:  How To Acid Etch A Concrete Floor?

What is the best finish for concrete floors?

Top Concrete Finishing Options

  • Acid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish.
  • Water-Based Stain.
  • Fast Stain.
  • Acrylic Sealer.
  • Standard Epoxy.
  • Metallic Epoxy.
  • Terrazzo or Granite Epoxy.
  • Quartz Sand Epoxy.

Can I polish my concrete slab?

Almost any structurally sound concrete floor, whether new or old, can be polished. However there are some exceptions, for example with new floors no special mix design is required to achieve good results – although the floor should be in place at least 28 days before polishing begins to ensure adequate curing.

Can I polish concrete yourself?

To polish concrete the do-it-yourself way, you’re going to need a concrete grinder. In addition, you’ll have to get your hands on an assortment of grinding discs (in a wide variety of grits, from 30 to 3,000) as well as polishing pads. Polishing concrete bears some similarities to sanding a hardwood floor.

Is polished concrete cheaper than floorboards?

Timber floorboards, on the other hand, will nearly always be more expensive than polished concrete to install and will cost more to maintain in the long run. Similarly, floor tiles will cost more in time and effort to keep clean.

What does it cost to polish concrete?

Polished Concrete Cost. Economical: You can expect to pay between $3 and $12 per square foot for polished concrete, depending on your location and the complexity of the project.

Leave a Reply

Your email address will not be published. Required fields are marked *