Readers ask: How To Paint Faux Brick On Concrete?

Can you paint concrete to look like brick?

Painting Faux Brick on a Concrete Wall



Apply tape across your concrete in a brick–like fashion. Then, using a sponge or roller, apply terracotta or brick-red paint over the wall. Using two colors or more can give a more dimensional, realistic effect.

What kind of paint do you use on faux brick?

If you decide to completely cover the faux brick paneling, a tough gloss or semigloss enamel is an excellent choice as a finish. The texture may make the paint prone to chipping or flaking over time, so the durability of enamel will help the paint look better longer. Eggshell or satin finishes also work well.

Can I paint straight over concrete?

Masonry paint (also called elastomeric paint or elastomeric wall coating) is a good choice for concrete painting because it contains binders that contract and expand with the concrete. Exterior house paint can crack and peel on concrete. No matter how you apply paint, let it dry for a day between coats.

Can you paint concrete to look like stone?

Choose your paint or stain colors accordingly, with one primary background color and at least one or two complimentary colors for the flecks and specks in the stone. Because concrete is so porous, you may want to use special concrete paint or stain products to achieve the best results.

What spray paint works on concrete?

You can’t go wrong if you use an acrylic latex paint rated for exterior work. On clean, bare concrete, the paint will soak into the pores to form a strong bond. Once your initial coat is done, you can spray on additional layers for coloring or accenting. You can also use spray paint for dry-brushing over the base coat.

How do you paint concrete to look like slate?

Use a water-based enamel paint specifically designed for concrete patios or floors to ensure the paint adheres properly. Brush on the paint if painting a relatively small area, or use a roller to apply the base coat to a large concrete surface.

Can you paint over faux brick panels?

Applying Paint to a Faux Brick Surface. Use a semi-gloss enamel paint for a durable finish on faux brick. The texture of faux brick surfaces can make paint prone to flaking off over time, and the enamel in the paint will help to prevent the paint from chipping.

How do you paint over faux brick?

You don’t need real bricks for the look of a painted brick wall. Just apply the same painting technique to any faux brick surface.



Paint the Wall

1. Thoroughly wash the faux brick surface and let it dry completely.
2. Apply a base coat (HGTV HOME® by Sherwin-Williams Thunder Clap HGSW1492 shown) and let dry overnight.

Does faux brick look good?

If brick is something you want to add to your home, the faux brick panels are really a great way to go. They cut easily on a miter saw, since they were made of Masonite board. They also have that brick texture to them, so they don’t appear as fake as maybe the wallpaper would.

Do I need to prime concrete before painting?

Generally speaking, priming is so essential to successful painting outcomes, concrete will always needs a primer. However, the existing surface needs to be primed before painting if: It is unpainted. It is peeling.

How do you get paint to stick to concrete?

Use a trisodium phosphate solution or strong detergent to scrub the floor. Sanding with coarse emery paper may be required to give the old surface a rough texture for good paint bonding. Test a small area to make sure the new paint will adhere.

How do you prep concrete for painting?

Clean the concrete surface with soap and warm water, removing any old paint. First, sweep away any surface leaves, debris, and dirt. Then remove any existing paint or gunk using a power washer or scraper and wire brush. Scrub away any dirt, grime, or gunk that is stuck to the concrete.