Readers ask: How To Drill Into Concrete Without A Hammer Drill?

Can you drill concrete without a hammer drill?

Things You‘ll Need



You can drill holes in concrete with a regular drill. Many people think that you cannot drill concrete with a regular drill. They believe that you need a special hammer drill with hardened drill bits. While these tools do make the job faster they are not necessary.

Can you use a regular drill to drill into concrete?

It is possible to drill into concrete with an ordinary rotary drill. Rotary drills take longer to drill into concrete than hammer drills and more physical effort is required. Excessive heat build-up can break the drill bit. One way to speed up the process and to avoid breaking the drill bit is to keep the bit cool.

What is the easiest way to drill into concrete?

Start the drill at its lowest speed for better control. Drill forward with steady, light pressure; do not force the drill. Drill the guide hole to a depth of 1/8- to ¼-inch. Stop the drill, sweep or blow away the accumulated concrete dust and pull out the drill.

Can you screw directly into concrete?

Concrete screws provide a quick, easy and incredibly strong way to fasten to concrete. And best of all, there’s no hammering required or anchor or shield to install. All you do is drill a hole and drive in the screw. That’s it.

Do I really need a hammer drill?

So when set properly, a hammer drill can almost always bore the hole. If the project requires drilling in masonry, you’re going to need the hammer function. Hammer drills are regularly used by contractors and professionals to install electrical boxes and other fixtures to brick and block walls.

What is the best hammer drill for concrete?

The Best Hammer Drills of 2021

• Bosch SDS Rotary Hammer RH328VC.
• DeWALT 20V XR Hammer Drill.
• Bosch 11255VSR Bulldog Xtreme.
• DeWALT 7.8-Amp DW511 Hammer Drill.
• Tacklife Electric 2,800 RPM Hammer Drill.
• Skil 6448-04 7.0 Amp Hammer Drill.
• Makita XPH12Z 18V Brushless Cordless Drill.
• Black and Decker Hammer Drill 6.5 Amps BEHD201.

Can I drill holes in concrete for drainage?

You will be trying to drain hundreds of square inches of surface area into a (maybe) 9 – 12 square inch hole. That small of an area opening will quickly saturate the soil and be of little or no use. To answer your question directly: Yes, it is easy to drill through concrete with the right equipment.

Will drilling into concrete crack it?

Drilling, nailing and screwing can all cause concrete to crack if they’re not done properly. Although it seems like a very tough material, concrete is in fact extremely brittle and prone to cracking.

What is the best drill for concrete?

Hammer Drill Bits



A hammer drill is perfect for light masonry. It works best at drilling holes in bricks, mortar and concrete blocks. But it can also handle the occasional hole in poured concrete.

What does a masonry drill bit look like?

Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them thanks to their wide arrow-shaped heads. They’re commonly used in hammer drills to grind masonry down as they cut through it. You can use them on brickwork, stone, breeze blocks, and other hard stone surfaces.

How long does a masonry drill bit last?

Sometimes the drill bit lasts even two to three weeks, and sometimes I break two of them in one shift.

Do I need to pre drill for concrete screws?

Each diameter of concrete screw has a specific diameter carbide drill bit that must be used for installation. The 3/16” diameter screw requires a 5/32” hole and the 1/4” requires a 3/16” hole. The hole must be drilled using a hammer drill with a carbide tipped bit meeting ANSI standards.

What is the strongest concrete anchor?

Wedge Anchors are extremely popular and are one of the strongest anchors for hold strength. Wedge anchors look and function like a sleeve anchor but have a much smaller sleeve near the bottom of the anchor.