Readers ask: How To Build A Floating Deck Over A Concrete Slab?

Can you build a floating deck over concrete?

Even if your patio is in terrible shape, you can deck over it. This project raises the level of your patio by 2-1/2 to 3-1/2 in. (depending on the thickness of your decking and whether or not you put spacers under the sleepers). So any door thresholds adjoining the patio must be at least that far above the concrete.

Can you lay decking on slabs?

It’s one of the best flooring options for backyard living spaces. Because of this, you may have thought of installing one of your old concrete slabs. But the question is, can you lay composite decking straight on concrete? Yes, you can lay or install composite decking on concrete if your want to.

Does a floating deck need footings?

When it comes to floating decks, which are decks that are built very close to the ground, they don’t need any sort of footing. You can either use small concrete blocks and planks, or you can use a post that sets into a pre-formed hole.

You might be interested:  Readers ask: How To Remove Gasoline Smell From Concrete?

Can you put Trex over concrete porch?

Some may be wondering, “Can you lay Trex composite decking over concrete?” Yes!

What is a floating deck?

A floating deck, also called a free standing deck, is simply a deck that’s not attached to any structure, including (of course) your house. To understand how to build a floating deck, here are a few basics. As an independent structure, a floating deck has a few advantages over an attached deck.

Can you cover concrete porch with wood?

Covering your concrete porch with wood provides a warmer feel. Covering a concrete porch with wood provides a warmer, cozier feel. It is also a good way to cover up peeling paint, slight chipping and discolored concrete. Whatever your reasons, adding a wood floor to your concrete porch is a fairly simple operation.

How do you lay decking on uneven ground?

To build a decking base on sloped uneven ground:

  1. Clear the area of all grass, weeds and debris using a good quality spade.
  2. Dig 1ft deep post holes.
  3. Set the posts using post mix so that the top is at or slightly above the desired height.

Can you pour concrete over wood deck?

Benefits of Installing an Overlay Over Wood



The concrete is rot-proof and insect-proof. This process provides a waterproof area underneath the deck which can then be used during inclement weather (if the deck is on the second story) or just for storage.

How do you prepare the ground under a deck?

To suppress the growth of unwanted vegetation underneath the deck, the area should be covered with landscaping fabric. First, add a layer of coarse sand for drainage. Then cover the sand with landscaping fabric. Bury the fabric under several inches of gravel.

You might be interested:  Readers ask: How Much For Concrete?

What direction should I lay my decking?

Whatever direction you lay them in.. put them with smooth side up. That way the water drains off easily rather than collecting in the grooves and growing all sorts of interesting slippy algae.

Can I put decking over pavers?

6) You can easily install a deck over brick paving or level compact sand. The nature of raised decks makes it easy for them to be installed over existing paving or sand. In fact, experts point to the installation of floating decks as a cost-effective way of covering dated or worn brick or patio.

Why deck posts should not be set in concrete?

A deck post should always be placed on top of footing, not inside concrete because it can break. Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.

Can you build a deck without digging holes?

OZCO Building Products’ OZ-Deck Foundation System is one of the best ways to build a deck without digging holes. It’s a hot-dipped galvanized plate that when combined with OZCO’s post anchors creates a solid foundation so you can build a solid deck without digging holes or pouring concrete.

How many footings do I need for a floating deck?

Well, for each hole, you’ll need to dig a hole 4′ deep and 8” wide. For an 8×10′ freestanding deck, you’ll need six footings. Unless you have access to a power auger, that’s a lot of digging. After digging each hole, you will need to install tube forms into each.

Leave a Reply

Your email address will not be published. Required fields are marked *