- 1 How much does a 20×20 stamped concrete patio cost?
- 2 How much does a 12×12 stamped concrete patio cost?
- 3 How much does it cost to pour a 12×12 concrete slab?
- 4 Which is cheaper pavers or stamped concrete?
- 5 Does stamped concrete increase home value?
- 6 How much does a 20×20 paver patio cost?
- 7 How much does a 10×20 concrete patio cost?
- 8 How long will stamped concrete last?
- 9 What happens if you don’t seal stamped concrete?
- 10 Is it cheaper to pour concrete yourself?
- 11 What is the difference between a concrete slab and a cement slab?
- 12 How much would a 4 inch slab of concrete cost?
- 13 Do and don’ts of paver installation?
- 14 Why is stamped concrete so expensive?
- 15 Are pavers worth the money?
How much does a 20×20 stamped concrete patio cost?
The average cost for a stamped concrete is $5 to $12 per square foot, not including the concrete slab which costs $2 – $7 per square foot. Most homeowners spend a total of between $3,751 – $8,540 for stamped concrete patio. Get free estimates from concrete pros near you.
How much does a 12×12 stamped concrete patio cost?
Stamped Concrete Patio Cost
Patios cost anywhere from $8 to $28 per square foot when made using stamped concrete. A 12-foot by 12-foot patio costs $1,160 to $4,040, while larger 16-foot by 20-foot patios are $2,560 to $8,960.
How much does it cost to pour a 12×12 concrete slab?
How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.
Which is cheaper pavers or stamped concrete?
In general, most sources suggest that the upfront cost of stamped pavement tends to be a more inexpensive option in relation to pavers. Long-term cost efficiency between the two however is relative to factors including proper installation, climate and periodic maintenance.
Does stamped concrete increase home value?
According to real estate agents on Trulia, adding stamped concrete does increase your home’s concrete curb appeal and may help you sell your home faster than others in the neighborhood. Real estate agents can all agree that concrete driveways can increase your property’s value more than asphalt.
How much does a 20×20 paver patio cost?
A 20×20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.
How much does a 10×20 concrete patio cost?
Cost of concrete per square foot
|Slab Size||Square Feet||Average Cost|
How long will stamped concrete last?
Provided it’s installed correctly and adequately maintained, stamped concrete will last just as long as non-stamped, or standard, concrete—about 25 years. That’s because the processes of installing stamped concrete and standard concrete are mostly the same.
What happens if you don’t seal stamped concrete?
An unsealed, decorative stained concrete surface will show faded colors in a matter of a few months. You could advise your customer that’s what happens with an unsealed project and let them make the decision about sealing, but rest assured that an “I told you so,” from you when the fading happens will not comfort them.
Is it cheaper to pour concrete yourself?
One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.
What is the difference between a concrete slab and a cement slab?
What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.
How much would a 4 inch slab of concrete cost?
It costs about $6 per square foot to pour concrete, or between $4 and $8 per square foot.
Concrete Work Cost by Thickness.
|Thickness||Typical Cost With Labor|
|4”||$5.35 per square foot|
|5”||$5.80 per square foot|
|6”||$6.20 per square foot|
|8”||$7 per square foot|
Do and don’ts of paver installation?
- 1 – DO map out your project area.
- 2 – DON‘T try to ‘guesstimate’
- 3- DO work with a reputable supplier.
- 4- DON‘T cut corners.
- 5 – DO compact base layers at 3” intervals.
- 6 – DON‘T compact bedding sand.
- 7 – DO use precision when laying and spacing your pavers.
- 8 – DON‘T hammer pavers together.
Why is stamped concrete so expensive?
You begin by having the client or designer pick out three things; the stamp design, the color of the concrete, and the color of the release which gives the highlights. It can also be cost prohibitive for the contractor to purchase a set of stamps as they can run upwards of $4,000 for a complete set.
Are pavers worth the money?
Pavers have a higher resale value because of their beauty and versatility. Concrete slabs are generally more common, but over time, pavers will net you more value because concrete is expensive to replace.