Contents

- 1 How many cubic feet are in a 80 pound bag of Sakrete?
- 2 How many square feet will an 80lb bag of concrete cover?
- 3 How many cubic feet is a 90 lb bag of concrete?
- 4 How many cubic feet are in a 60 pound bag of concrete?
- 5 Which is better Sakrete or Quikrete?
- 6 How many cubic feet is a 5 gallon bucket?
- 7 Can you pour concrete directly on dirt?
- 8 How many 80lb bags of concrete do I need for a 10×10 slab?
- 9 How many bags of cement do I need for 100 square feet?
- 10 How many bags of concrete do I need for 2 yards?
- 11 How many bags of concrete can a mixer hold?
- 12 How much concrete does a truck hold?
- 13 Is quikrete as strong as concrete?
- 14 How many 60 lb bags are in a yard?
- 15 How many bags of concrete do I need for a 6×6 post?

## How many cubic feet are in a 80 pound bag of Sakrete?

The **Sakrete** website has a concrete calculator, but to answer your question a little better in real-world terms, an **80**# **bag** will provide 0.6 **cubic feet** of concrete, which is a block that’s appx 7.25″ x 12′ x 12″.

## How many square feet will an 80lb bag of concrete cover?

4 sq **feet** in that amount of **cement**.

## How many cubic feet is a 90 lb bag of concrete?

Each **90**–**pound bag of QUIKRETE**® **Concrete** Mix will yield approximately 0.675 **cubic feet** of mixed **concrete**.

## How many cubic feet are in a 60 pound bag of concrete?

30 cubic feet, 60 pounds of concrete mix yields. **45 cubic feet** and an **80**-pound bag yields. 60 cubic feet.

## Which is better Sakrete or Quikrete?

In general, **Sakrete** is more suitable for flat surfaces and fence posts, while **Quikrete** is **better** for curbs, stairs, sidewalks, and other footings. Neither product is **better** than the other; however, one may be **better** for a particular job.

## How many cubic feet is a 5 gallon bucket?

Since a one-**gallon pail** is equal to 0.134 **cubic feet**, a standard five-**gallon bucket** equals exactly 0.67 **cubic feet**. We’ll explain how we arrived at that number, what exactly is a **cubic foot**, how you can calculate it yourself and some uses for **the five**–**gallon bucket**.

## Can you pour concrete directly on dirt?

Long story short, yes **you can pour concrete** over **dirt**.

## How many 80lb bags of concrete do I need for a 10×10 slab?

For a **10 x 10 slab**, you **would need** 77 60-pound **bags** or 60 80-pound **bags**.

## How many bags of cement do I need for 100 square feet?

Ans.:- 7.6 no of **cement bags** (381.30 kgs) are required for **100 sq ft** rcc roof slab 4 inch thick m20 grade concrete. Ans.:- 7.6 **bags** (381.30 kgs), 9.5 **bags** (476.10 kgs) & 11.4 **bags** ( 570.8 kgs) **cement** are required for **100 sq ft** rcc roof slab 4 inch, 5inch & 6 inch thick respectively in m20 grade of concrete.

## How many bags of concrete do I need for 2 yards?

The number of **bags** you **need will** vary depending on the type of **concrete** mix you choose for your project. If you’re using 50lb **bags of concrete**, you’ll **need** 72 **bags** to make a **yard**. If you’re using 60lb **bags of concrete**, you’ll **need** 60 **bags** to make a **yard**.

## How many bags of concrete can a mixer hold?

Heavy-duty paddles mix the **concrete** to a uniform consistency. This **concrete mixer can** fit up to two **bags of concrete**.

## How much concrete does a truck hold?

**Concrete trucks** weigh an average of 25,000 lbs. by themselves and up to 40,000 lbs. when carrying a full load. Their capacity is around 8 cubic yards, but **can** be up to 10 cubic yards if fully-loaded.

## Is quikrete as strong as concrete?

**Quikrete** fast setting **concrete** is just as **strong** as regular **concrete**. **Concrete** gets its strength from a chemical reaction that occurs over time during curing. After it’s had time to cure, which usually take 28 days to complete, **Quikrete** can reach strengths up to 5000 psi.

## How many 60 lb bags are in a yard?

**60 pound bag** yields.017 cubic **yards**.

## How many bags of concrete do I need for a 6×6 post?

As I recall, a 60# **bag of concrete** is about. 5cf, so you’d need 3 **bags** per hole.