Contents
- 1 How do you clean concrete floors at home?
- 2 Does white vinegar clean concrete?
- 3 What is the best concrete cleaner?
- 4 What is the best cleaner for stained concrete floors?
- 5 Can you use Pine Sol on concrete floors?
- 6 How do you clean dirty concrete?
- 7 What can I use to clean my concrete basement floor?
- 8 Will vinegar kill mold on concrete?
- 9 How do you remove black stains from concrete?
- 10 Is Simple Green good for cleaning concrete?
- 11 Does OxiClean clean concrete?
- 12 Does CLR damage concrete?
How do you clean concrete floors at home?
How to Clean Concrete Floors
- Clear debris. Clean and clear the floor of all debris, dirt and dust using a vacuum, soft bristle broom or dry dust mop.
- Apply Simple Green Multi-Surface Floor Care. Spray the cleaning solution as a light mist across your floor section by section.
- Mop up in sections. Wet mop with clean water and wring well.
- Dry.
Does white vinegar clean concrete?
Yes. Vinegar makes a great cleaner for stained concrete floors. Because of its acidity, you should dilute it 50/50 with warm water to avoid damaging the floors. However, you can use small amounts of full-strength vinegar for touch stains, followed by a quick water rinse.
What is the best concrete cleaner?
Our Top Picks
- Best Overall. Zep Neutral pH Floor Cleaner Concentrate ZUNEUT128.
- Best Bang For The Buck. Sunnyside 64216 TSP All Purpose Cleaner.
- Best Eco-Friendly. ACT Concrete Cleaner.
- Best For Pressure Washing. Simple Green Oxy Solve Total Pressure Washer Cleaner.
- Best Waterless.
- Best Degreaser.
- Best For Mold and Mildew.
What is the best cleaner for stained concrete floors?
For most concrete floors, you can use a mixture of flour and hydrogen peroxide or water and trisodium phosphate. But for stamped concrete floors or polished concrete floors, you’ll want to use a gentler solution. If your indoor concrete flooring is stamped, use a mop and mix water and a mild cleaner in a bucket.
Can you use Pine Sol on concrete floors?
You can use Pine–Sol® Cleaners on most concrete floors. Pine–Sol® Cleaners are concentrated formulas that you dilute for most jobs. For general concrete cleanup, use a 24 oz. bottle of Pine–Sol® for 12 gallons of cleaning power.
How do you clean dirty concrete?
Mix 1/2 cup baking soda to one gallon of water for a gentle cleaning solution. Add 1/8 cup of liquid dish detergent. Spray on patio surface, let sit for 30 minutes, then scrub and rinse. For heavily stained or mildewed patios, you may need a pressure washer.
What can I use to clean my concrete basement floor?
If a concrete or concrete-block surface is especially dirty, add detergent and a quarter cup of ammonia to a bucket of warm water and brush the solution over the surface with a stiff nylon brush. (Never use a metallic brush; metallic fibers can get trapped in the concrete and rust.)
Will vinegar kill mold on concrete?
Vinegar usually isn’t recommended to kill mold on concrete. Although it’s unlikely to harm the concrete itself, it may damage the surrounding cement.
How do you remove black stains from concrete?
Then prepare a cleaning solution of one-eighth cup liquid dishwashing detergent, one-half cup baking soda, and one gallon of water. Mix the solution thoroughly before pouring it over the stained area. Use a nylon scrub brush to work the solution into the stain, scrubbing until the marks are gone. Rinse thoroughly.
Is Simple Green good for cleaning concrete?
You can use Simple Green Oxy Solve Concrete and Driveway Cleaner to clean a concrete patio with or without a pressure washer. It removes oil, grease, grime and most stains and discolorations. Its biodegradable formula is safe for lawns and pets.
Does OxiClean clean concrete?
The active ingredient in OxiClean is sodium percarbonate, a powder that, when mixed with water, releases hydrogen peroxide and soda ash. The powder mixes best into warm-to-hot water. Mop that onto the walkway and wait five to 30 minutes. During that time, you can scrub the concrete to make the cleaning more effective.
Does CLR damage concrete?
While CLR is generally safe and effective in removing calcium, lime and/or rust from concrete, ALWAYS spot test in an inconspicuous area first. If there are no adverse reactions between CLR and the concrete (change in colour or texture), it would be safe to use on the other affected areas of the concrete.