Contents

- 1 How many yards of concrete do I need for a 10×10 slab?
- 2 How do you figure a yard of concrete?
- 3 How much is a yard of concrete 2020?
- 4 How many 80 lb bags of concrete are in a yard?
- 5 How many bags of concrete makes a yard?
- 6 Do you need rebar for 4 inch slab?
- 7 How many bags of concrete do I need for a 10×20 slab?
- 8 How much does it cost for a 12×12 concrete slab?
- 9 How much is a truck load of concrete cost?
- 10 Can I pour a 2 inch concrete slab?
- 11 How much does a 20×20 concrete patio cost?
- 12 Can I pour my own concrete slab?
- 13 How many bags of cement do I need for 1 cubic yard?
- 14 How many bags of concrete do I need for a post hole?
- 15 How much area does a yard of concrete cover?

## How many yards of concrete do I need for a 10×10 slab?

10 x 10 = 100 square feet. 4 ÷ 12 =.33. 100 x.33 = 33 cubic feet. 33 x.**037** = **1.22** cubic yards.

## How do you figure a yard of concrete?

**How do I calculate how much concrete I need for a slab?**

**Measure**the area in feet.- Multiply length by width, and then by thickness.
- Divide the resulting number by 27 to find cubic
**yards**.

## How much is a yard of concrete 2020?

Use $90 per cubic **yard** as a ballpark figure for **concrete prices**, but **concrete** slab **cost** will vary by region. Also, expect a fee of about $60 per load for delivery from a **concrete** truck for **concrete cost**.

## How many 80 lb bags of concrete are in a yard?

**how many 80lb bags of concrete are in a yard**? You will need 45 **bags of concrete** mix to make a cubic **yard** of **concrete**. There’s 27 cubic feet of **concrete** in a cubic **yard**.

## How many bags of concrete makes a yard?

On average, it will take 90 40lb bags, **60** 60lb bags, or 45 80lb bags to fill one cubic yard of concrete.

## Do you need rebar for 4 inch slab?

No, **you do** not **need rebar** for a **4**–**inch slab** of concrete on grade. A **4**–**inch**-thick **slab** cast on the ground and in permanent contact with it will float and **rebar** is not required. **Rebar** is recommended on concrete measuring 5 – 6 **inches** thick.

## How many bags of concrete do I need for a 10×20 slab?

A 60-pound **bag** yields. 017 cubic yards, and an 80-pound **bag** yields. 022 cubic yards. For a 10 x 10 **slab**, you **would need** 77 60-pound **bags** or 60 80-pound **bags**.

## How much does it cost for a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between **$888** and $1,584, with professional labor and materials included.

## How much is a truck load of concrete cost?

The average cost of concrete delivery is **$119** to $147 per cubic yard for a full 10-yard truckload of ready-mix concrete, and $172 per yard for a short-load of less than 10 yards. The cost of concrete to pour a sidewalk is $255 to $320, while a driveway or garage slab runs $1,060 to **$1,270**.

## Can I pour a 2 inch concrete slab?

If done properly, new **concrete can** often be **poured** right over an existing **slab**. For this to be feasible, the contractor needs to **pour** at least **2 inches** thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the **concrete**.

## How much does a 20×20 concrete patio cost?

Cost to Install Concrete Patio by Size

Size in Feet | Square Footage | Price Range |
---|---|---|

12×14 | 168 | $1,400 – $4,000 |

15×15 | 225 | $1,800 – $5,500 |

16×18 | 288 | $2,300 – $7,200 |

20×20 |
400 | $3,000 – $10,000 |

## Can I pour my own concrete slab?

Used for walkways, patios, and floors, **concrete slabs** are inexpensive to install and durable enough to last for years. When you **pour** your **own concrete slab**, you’re giving **yourself** a design material that is adaptive to all of your needs.

## How many bags of cement do I need for 1 cubic yard?

Pure **cement**, sand and crushed rock all have about the same density, so a block of pure **cement** measuring **1 cubic yard** of volume (about 3,600 pounds) will contain 45 **bags of cement**.

## How many bags of concrete do I need for a post hole?

Mix two 50lb **bags of concrete** with water in a mixing tub or 5-gallon bucket. Add **concrete** into the **hole** and around the 4” x 4”. Depending on your climate, let **concrete** set up for 24 – 48 hours.

## How much area does a yard of concrete cover?

One Cubic Yard of Concrete: 4-inches thick – covers 81 **square feet**.