Quick Answer: How To Get Thinset Off Concrete Floor?

How do you remove Thinset from a concrete floor?

Hammer your 1 in (2.5 cm) putty knife at a 45-degree angle to the thinset.

  1. You can also use a masonry chisel that is the same width.
  2. Continue removing the thinset in small chunks until you’ve removed enough to accommodate your new tiles.
  3. Always use a putty knife with a hammer-end handle and sharp blade.

How do you remove dried thinset?

Scrape away any dried thinset by using a chisel, chipping each mark from the tile without scratching the tile itself. Use a grout scraper to remove any remaining thinset from the grout lines. Get a 50-grit sanding disc and place it on a rotary sander at its lowest setting.

How do you remove dried mortar from concrete?

An easy solution is to let the mortar dry and, at the end of the project, clean the mortar off the wall with muriatic acid. You can apply these same techniques to most masonry projects involving cement products. Muriatic acid is also called hydrochloric acid, spirits of salt, or acidum salis.

You might be interested:  Readers ask: What Does A Yard Of Concrete Cover?

Does vinegar remove Thinset?

Dampen the thinset area as you would with water, but use straight white vinegar. Vinegar is a light acid and works well for concrete-based materials when it comes to cleanup.

Will a concrete grinder remove Thinset?

Floor Grinders



A strong grinding surface, such as diamond, is necessary to break down the thinset mortar. With the right grinding surface material, the thinset can be ground away in no time.

What is the best way to remove tile from a concrete floor?

There is no easy way to remove tile from a concrete floor. It is a matter of chiseling up the tile, either by hand or using an electric tool such as a small jackhammer or tile stripper. Also bear in mind that removing the tiles is generally the easy part of the removal process.

Does Thinset need to be removed?

The answer is, “if you want to do it properly, yes”. You’re going to find it near impossible to get a good base to lay tile on if you try to apply thinset overtop of old thinset.

How do you get Thinset off the bottom of tile?

Apply muriatic acid directly to the back of a piece of tile if the mortar is particularly thick, such as more than 1/8 inch. Use a paint brush and coat the mortar with pure acid. As it loosens the concrete, use your scrub brush with water to gently scrub and remove the excess. Apply more as needed.

How do you remove hardened cement?

How do you remove hardened concrete from tools?

  1. Wear safety glasses, gloves and a mask.
  2. Soak the tools in white vinegar. Vinegar will often dissolve a lot of the cement.
  3. Use a pressure washer to blast off more of the cement.
  4. Scrape off small spots with a small, flexible putty knife.
  5. Use a cement removal product.
You might be interested:  Quick Answer: How To Edge Concrete?

Can muriatic acid damage concrete?

It is also highly unpredictable and unreliable causing the surface to be under- or over-etched and uneven. The muriatic acid used on concrete and bricks is extremely caustic which means it can burn the skin of the installer.

Is Thinset a mortar?

Thinset is an adhesive cement used to secure floor and wall tiles to concrete surfaces. The word “thinset” is sometimes used interchangeably with “mortar,” because it’s a type of modified mortar made specifically for tile.

How do you remove hardened tub Thinset?

Scrape drops of dried thin set with a plastic trowel or spatula, taking care not to scratch the tub. Mix equal parts of white vinegar and water in a spray bottle. Soak areas of excess thin set with this solution. Wait at least 10 minutes and wipe with a damp sponge.

How do you store Thinset overnight?

There is no way to save mixed thinset. Thinset cointains portland cement, which chemically reacts with the water you add to harden. It does not dry by evaporation, so if you mix up a batch of thinset and pack it in an air-tight container, it will still harden in a few hours.

Leave a Reply

Your email address will not be published. Required fields are marked *