Quick Answer: How To Concrete Fence Post?

How deep should a concrete fence post be?

For example, if you have a 3 inch wide post that you need to sit over 1.83m (6ft) in height above the ground, we recommend the hole size should be: 230mm [wide] (9”) x 600mm [depth]. This rule of thumb that can be followed for all size posts (e.g. a 6ft high fence would require a hole depth of at least 600mm or 2ft).

Should I use concrete or cement for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

What is the best concrete for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow. Once you’ve finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2×4.

Is 2 feet deep enough for fence posts?

Project Instructions



The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How do you keep fence posts from rotting in concrete?

Consider Adding Posts to Concrete



From here, you should fill the hole with about 6 inches of gravel. This will prevent rotting by ensuring that the post is kept dry when water makes its way into the soil. Place the post in the gravel, then fill with a batch of cement until it reaches the top of the hole.

Will fence posts rot in concrete?

A: Actually, your point is well taken. Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.

Do you need concrete for mailbox post?

Most mailbox post installations require a 60 lb. bag of dry concrete. Pour a little more water on top of the concrete mix. The concrete mix in the ground will soak in both the water you poured earlier as well as the water from the top.

Do I need gravel under concrete?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

How do I put a post in the ground without concrete?

Procedure:

1. Find a concrete surface and lightly tamp your digging iron against it.
2. Remove the turf and topsoil from the site of the post.
3. Dig the hole putting the displaced earth onto the tarp.
4. Pour 4 inches of gravel into the hole.
5. Place the post in the hole.
6. Add another 2 inches of gravel around the base of the post.

Is quikrete as strong as concrete?

Quikrete fast setting concrete is just as strong as regular concrete. Concrete gets its strength from a chemical reaction that occurs over time during curing. After it’s had time to cure, which usually take 28 days to complete, Quikrete can reach strengths up to 5000 psi.

How deep should a 8 foot fence post be?

In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.

How long does it take for concrete to dry for fence posts?

The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.

How do you build a fence without a sinking post?

If you need a temporary fence or a border that you can move as needed, a quick way is to use concrete blocks. Attach a bracket to a concrete block that is heavy enough to hold the wood or other material you plan to use to build the fence. The posts can be mounted to the brackets and the fence finished from there.