Quick Answer: How Much Should A Concrete Driveway Cost?

Which is cheaper concrete or asphalt driveway?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.

How much should a driveway cost?

Cost of Concrete Driveway

Concrete Driveway Costs Zip Code Sq. ft.
Basic Better
Concrete Driveway – Installation Cost $1250.00 – $1275.00 $1500.00 – $1575.00
Concrete Driveway – Total $1625.00 – $1712.50 $1962.50 – $2100.00
Concrete Driveway – Total Average Cost per square foot $6.67 $8.13

Does a concrete driveway increase home value?

You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.

You might be interested:  How To Clean Up Spilled Paint Thinner On Concrete?

How much does it cost to pour a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

What is the cheapest type of driveway?

Pound for pound, aggregate is the cheapest of these four common driveway materials. A basic gravel driveway can cost as little as $0.50 per square foot – an order of magnitude less than a professionally installed asphalt, stone, or concrete driveway. Durability. Aggregate is extremely durable.

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

How can I widen my driveway cheaply?

Alternatives to Concrete and Asphalt



Installing stabilized gravel with permeable pavers, however, is the single cheapest and most effective solution to extending a driveway while providing long-term durability and functionality. TRUEGRID offers every type of paver you need to match your driveway situation.

What type of driveway is best?

What Type of Driveway Surfacing Should You Choose?

  • Tarmac/Asphalt. Tarmac is probably the cheapest type of driveway surfacing.
  • Concrete. Concrete is another low-priced form of driveway surfacing.
  • Loose Gravel. Loose gravel is a very popular method for surfacing a driveway.
  • Block Paving.
  • Paving Slabs.
  • Resin Bound Driveways.
  • Conclusion.
You might be interested:  How Much Does A Yard Of Concrete Weigh Wet?

How long do concrete driveways last?

A concrete driveway should last a minimum of 20 years, but a full replacement is necessary when cracks and pits are interconnected. If your foundation is lifting or there are numerous potholes across the surface of the concrete leading to drainage issues, it’s time to replace the driveway.

Does homeowners insurance cover driveway replacement?

Home insurance may help repair a crack in the driveway if it was caused by a covered peril, such as a natural disaster or vandalism. Say a storm knocked over a large tree which cracked your driveway. In some cases where the event occurs suddenly, the home insurance policy will cover it.

Does a driveway add value?

How much value does a driveway add to a home? According to Property Price Advice, a driveway can add between 5 and 10% to your home’s value.

Is it cheaper to pour concrete yourself?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

Is it cheaper to buy premixed concrete?

It’s cheaper to do all the prep and buy the concrete premixed and delivered. For example, a 10×20′ slab of 4″ concrete would be a minimum of 2.5-3 yards. Here concrete is about $80/yard (closer to $70), or $240 for the concrete. That same slab would take 223 40-pound bags, or 112 80-pound bags.

You might be interested:  Readers ask: How To Make A Concrete Vanity Top?

How much would a 4 inch slab of concrete cost?

It costs about $6 per square foot to pour concrete, or between $4 and $8 per square foot.



Concrete Work Cost by Thickness.

Thickness Typical Cost With Labor
4” $5.35 per square foot
5” $5.80 per square foot
6” $6.20 per square foot
8” $7 per square foot

Leave a Reply

Your email address will not be published. Required fields are marked *