Quick Answer: How Much Does Concrete Delivery Cost?

Is it cheaper to mix your own concrete or have it delivered?

It’s cheaper to do all the prep and buy the concrete premixed and delivered. For example, a 10×20′ slab of 4″ concrete would be a minimum of 2.5-3 yards. Here concrete is about $80/yard (closer to $70), or $240 for the concrete. That same slab would take 223 40-pound bags, or 112 80-pound bags.

How much does it cost to pour a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

How much does it cost to concrete a backyard UK?

Concrete can be a relatively cheap option for patios – the average costs for concrete patios per square metre generally come in at around £30 to £40 per square metre, including materials and labour for laying it.

You might be interested:  Often asked: How To Get Grease Off Of Concrete?

How much is poured concrete UK?

The price of concrete depends on many factors, including where you’re located and the type you’ve ordered. However, in general, you should be looking at a cost of between £65 and £85 per cubic metre.

What is the cheapest way to buy concrete?

What Is The Cheapest Way To Buy Concrete? The cheapest way to buy concrete is to mix your own by purchasing pre-mixed bags for $4.49 each and renting a concrete mixer for $120 per day. The second best way, it to buy a bulk truckload full (10 cubic yards) for $1,169 including delivery.

How much does a 20×20 concrete patio cost?

Cost to Install Concrete Patio by Size

Size in Feet Square Footage Price Range
12×14 168 $1,400 – $4,000
15×15 225 $1,800 – $5,500
16×18 288 $2,300 – $7,200
20×20 400 $3,000 – $10,000

Is it cheaper to pour concrete yourself?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

How many bags of concrete do I need for a 10×12 slab?

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that’s an extra 8 60-pound bags or 6 80-pound bags.

What is the difference between a concrete slab and a cement slab?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.

You might be interested:  Quick Answer: How Much Concrete Do I Need Per Fence Post?

How much would it cost to concrete my backyard?

The typical concrete patio is approximately 288 sq ft and costs an average of $2,800 (about $9 per sq ft); depending on a variety of factors, your cost will likely fall between $1,300 and $5,100 ($3-$15 per sq ft).

How much would it cost to cement my backyard?

Concrete Patio Costs



The average cost to pour a concrete patio is $2,433, with most homeowners paying between $1,212 and $4,318 for professional installation. Labor costs can run between $3 and $10 per square foot and materials cost $1 to $2 per square foot.

Is it expensive to lay concrete?

Concrete slabs typically cost about $6 per square foot, or between $4 and $8 per square foot including labor. That’s about $5,400, or between $3,600 and $7,200 for a typical 30- by 30-foot slab that’s 6 inches deep. Materials alone cost about $4 per cubic foot.

How many bags of cement do I need for 1 cubic meter?

Batching by volume – DIY

Materials 0.2 m3 concrete 1 m3 concrete
cement (no. 25 kg bags) 2.5 12
all-in aggregate (volume in m3) 0.25 1.3
water (volume in litres) 32 160
cement (no. 25 kg bags) 3.5 14

What is the cost of 1m3 of concrete?

Ready Mix Concrete, Grade Standard: M10 To M50, Cubic Meter, Rs 3400 /cubic meter | ID: 13959816473.

How do you calculate concrete?

How to calculate concrete:

  1. Determine how thick you want the concrete.
  2. Measure the length and width that you’d like to cover.
  3. Multiply the length by the width to determine square footage.
  4. Convert the thickness from inches to feet.
  5. Multiply the thickness in feet by the square footage to determine cubic feet.

Leave a Reply

Your email address will not be published. Required fields are marked *