- 1 Why won’t my concrete saw start?
- 2 How much compression should a Stihl ts420 have?
- 3 Why won’t my Stihl saw start?
- 4 How do you start a Makita concrete saw?
- 5 Will a Stihl saw cut wood?
- 6 What is a Stihl saw?
- 7 What is a Stihl saw used for?
- 8 What is a k12 saw?
- 9 What is a partner saw?
- 10 What is a quick cut saw?
Why won’t my concrete saw start?
If your concrete saw is hard to start, check the following parts: air filter, starter, filter, carburetor, muffler, spark plug, and gasket. Also, ensure you are using fresh fuel and that it is mixed to the proper ratio with your oil for your two-stroke engine. Bad fuel can cause a hard start situation.
How much compression should a Stihl ts420 have?
Technician: Vince O. Hello,the compression should not be lower than 100 psi (about 120 is good).
Why won’t my Stihl saw start?
If you can’t start the engine, the fuel may be contaminated if the saw has been in storage, and you should change it. If starting is still difficult, use a toothbrush to clean the spark arrestor — located behind the muffler — and change the spark plug and fuel filter, which is located in the gas tank.
How do you start a Makita concrete saw?
First you will want to place the black lever in the back by the handle in the up choke position. You will then pull the cord until the saw “hits”, that means it acts like it wants to start but doesn’t. After it does this or no more than four pulls place the lever into the middle run position.
Will a Stihl saw cut wood?
These safety precautions and warnings apply to the use of all current STIHL Cutquiks. Use your cut-off machine only for authorized uses. For instance, it is not suitable for cutting wood or wooden objects. Misuse may result in personal injury or property damage, including damage to the machine.
What is a Stihl saw?
listen), German: [ʃtiːl]) is a German manufacturer of chainsaws and other handheld power equipment including trimmers and blowers. Stihl claims to be the world’s best-selling brand of chain saws, and the only chain saw manufacturer to make its own saw chains and guide bars.
What is a Stihl saw used for?
Cut-off saws (variously known as disc cutters, skill saws, Stihl saws, con saws or ‘whizzers’) are widely used in the construction industry. These saws can be powered by combustion engines, electricity (110 volts) or, less commonly, by compressed air.
What is a k12 saw?
The K-12 FIRE-RESCUE SAW is designed exclusively for the fire service, pound per pound this saw is the most effective power cutter in the field. 6.1 horsepower weighing an unbelievable 23 pounds.
What is a partner saw?
The Partner Saw is a two-stroke, air-cooled rotary saw with the engine made by Husqvarna and is specifically designed for the fire service. It utilizes a carburetor system that lets the saw run in virtually any position. Features of the saw are designed to be used with firefighting gloves on.
What is a quick cut saw?
A concrete saw (also known as a consaw, road saw, cut-off saw, slab saw or quick cut) is a power tool used for cutting concrete, masonry, brick, asphalt, tile, and other solid materials. Abrasive cut-off wheels can also be used on cut-off saws to cut stone and steel.