- 1 Do you need underlay for solid wood flooring on concrete?
- 2 How do you install hardwood flooring over concrete?
- 3 What is the best wood flooring for concrete slab?
- 4 What is the best flooring to put on a concrete floor?
- 5 Can you glue down hardwood flooring to concrete?
- 6 Do I need a vapor barrier between concrete and wood flooring?
- 7 Can you glue down 3/4 inch hardwood flooring?
- 8 Do you need a subfloor over concrete?
- 9 Can I put plywood over concrete floor?
- 10 Is concrete floor cheaper than wood?
- 11 Can you float a solid wood floor on concrete?
- 12 Is it better to glue or float an engineered wood floor?
- 13 Can you put flooring over concrete?
- 14 Can mold grow under vinyl flooring on concrete?
- 15 How do you prepare a concrete floor for peel and stick tile?
Do you need underlay for solid wood flooring on concrete?
Because you are likely to be fixing your solid wood boards to the subfloor, underlay is not usually used, but there are slatted underlays you can buy for the purpose, with pre-cut slots that allow the floor to be glued directly to the subfloor (try Acoustalay Slatted Glue Through Underlay, available from Screwfix).
How do you install hardwood flooring over concrete?
Lay 6-mil polyethylene sheeting over the concrete to minimize moisture migration from the concrete up into the wood flooring. Then fasten 3/4-in. treated plywood to the concrete with concrete screws spaced every 16 in. Alternatively, screw rows of treated 1x4s to the concrete 16 in.
What is the best wood flooring for concrete slab?
A floating floor is the perfect companion for a concrete subfloor. According to flooring experts, the best kind of wood flooring to use with a concrete subfloor is a floating engineered wood floor. This kind of floor performs well, resists moisture and is easy to install.
What is the best flooring to put on a concrete floor?
Ceramic tile is the designer’s choice, with tons of colors and styles. It’s unaffected by moisture and goes directly onto concrete that’s smooth and free of cracks. Vinyl tile and sheet flooring also goes directly over prepared concrete and will withstand even minor flooding with no ill effect.
Can you glue down hardwood flooring to concrete?
Solid parquet hardwood flooring can be glued directly to a concrete slab on grade or above grade with the use of a manufacturer recommended vapor retarder. Solid parquet should not be installed below grade.
Do I need a vapor barrier between concrete and wood flooring?
Do I need a vapor barrier for hardwood floors?” The answer is YES! Moisture can destroy hardwood flooring. It causes cupping, warping, and even mildew if not treated. You must install a moisture barrier to protect your flooring from water wicking up from below.
Can you glue down 3/4 inch hardwood flooring?
No, 3/4 solid Hardwood flooring can expand and contract more than engineered wood flooring. I would not suggest direct gluing down any 3/4–inch thick solid Hardwood flooring to any surface, the adhesive bond might not allow the solid wood flooring to move or breath normally and can cause the wood flooring to distort.
Do you need a subfloor over concrete?
While a subfloor is not necessary to add structural strength when you‘ll be laying finish flooring on top of a concrete slab (as in a basement remodel), subflooring over concrete offers two other advantages: A subfloor will help insulate against a concrete floor that becomes overly cold in winter.
Can I put plywood over concrete floor?
If you’re installing plywood over an existing dry concrete floor, you shouldn’t have any problem. However, a new concrete floor contains a lot of moisture. So, you need to allow it to cure for at least 60 days before even bothering to check the moisture level.
Is concrete floor cheaper than wood?
It is possible for a “fancy” concrete floor to be more expensive than an economical hardwood floor. In general, a tight budget will find concrete floors more budget-friendly, but it depends on the design and finish of the concrete floor.
Can you float a solid wood floor on concrete?
The quickest way to get new wood underfoot is to install a floating floor. Unlike traditional solid–wood strips, a floating floor isn’t nailed down. Instead, the planks are either glued or snapped together. The planks go down fast, over virtually any material—concrete, plywood, sheet vinyl, even ceramic tile.
Is it better to glue or float an engineered wood floor?
As an installation method, glued down is most suited for either concrete or wood subfloors. If you are trying to decide between the two, then for engineered wood flooring floating is usually the best option as you can install it quickly and don’t have to worry about which glue to use and how long to wait for it to dry.
Can you put flooring over concrete?
Laminate flooring can be installed over concrete, wood or carpet subfloor or other surfaces. Installation of good quality underlayment is highly recommended. Installing underlayment is easy but it has to be done precise to avoid any tears.
Can mold grow under vinyl flooring on concrete?
Although vinyl plank flooring is well-known to be waterproof, it does not mean that liquids can seep through the cracks, grooves, or edges and become trapped under the planks, allowing mold to grow underneath your floors.
How do you prepare a concrete floor for peel and stick tile?
Steps To Prepare Cement Subfloor For Self Adhesive Vinyl Tiles:
- Check your concrete floor.
- Clean cracks, pits and holes of concrete floor.
- Fill cracks, pits and holes of concrete floor.
- Polish spots on concrete floor.
- Fill the lower areas on the concrete floor.
- Make rough concrete slab smooth.
- Clean the concrete floor.