Question: How To Figure Square Footage For Concrete?

How many square feet is a yard of concrete 4 inches thick?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet. 5-inches thick – covers 65 square feet.

How do I work out how much concrete I need?

Next, you need to determine square footage – do this by multiplying the length by the width. Convert the thickness from inches to feet. Then, multiply the thickness (in feet) by the square footage to determine cubic feet. Next, you need to convert cubic feet into yards – do this by multiplying it by 0.37.

How much concrete do I need for a 10×10 slab?

For a 10 x 10 slab, we’d suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

You might be interested:  Often asked: How To Mix Muriatic Acid To Clean Concrete?

How many bags of quikrete do I need?

Divide the total cubic feet needed by the total cubic feet that can be made from one bag of Quikrete Concrete Mix. Quikrete’s Concrete Mix yield’s about. 15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields. 30 cubic feet, 60 pounds of concrete mix yields.

How many bags of cement do I need for 100 square feet?

Ans.:- 7.6 no of cement bags (381.30 kgs) are required for 100 sq ft rcc roof slab 4 inch thick m20 grade concrete. Ans.:- 7.6 bags (381.30 kgs), 9.5 bags (476.10 kgs) & 11.4 bags ( 570.8 kgs) cement are required for 100 sq ft rcc roof slab 4 inch, 5inch & 6 inch thick respectively in m20 grade of concrete.

How much does 2 yards of concrete cost?

According to the NRMCA – Ready Mixed Concrete Industry Data Survey, the average cost of concrete in 2018 was $120 per cubic yard, or $240 for the 2 cubic yards needed for a typical 10-by-10-foot patio.



Bulk Concrete Prices.

Cubic Yards Price Range
1* $140-$200
2* $280-$400
3* $420-$600
4* $560-$800

How far does a 25kg bag of concrete go?

As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm. We also offer 855kg bulk bags.

How many bags of cement do I need for 1 cubic meter?

Batching by volume – DIY

Materials 0.2 m3 concrete 1 m3 concrete
cement (no. 25 kg bags) 2.5 12
all-in aggregate (volume in m3) 0.25 1.3
water (volume in litres) 32 160
cement (no. 25 kg bags) 3.5 14
You might be interested:  Question: How To Patch Holes In Concrete Driveway?

How many bags of cement make 1m3 of concrete?

* 108 x 20kg bags of Boral Cement Concrete Mix will fill 1 cubic metre (m3).

How thick should my concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

How many square feet does a 80lb bag of concrete cover?

4 sq feet in that amount of cement.

How many square feet is in a 60 pound bag of concrete?

A 60 lb. bag provides 0.45 cubic feet of cured concrete.

Can you pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

Is quikrete as good as concrete?

Quikrete premixed concrete is just as good, and strong, as traditional concrete you buy from a plant or concrete you mix on site. Concrete is made from sand, cement and aggregate stone and that’s exactly what’s in Quikrete premixed concrete. it’s very strong and sets much quicker than traditional concrete.

How much quikrete Do I need to fill a 5 gallon bucket?

Your 5 gallon bucket is 0.7777850 cubic feet dry. You will need 2 – 50lb bags of Quikrete Fast Setting Concrete Mix to complete your project.

Leave a Reply

Your email address will not be published. Required fields are marked *