Contents

- 1 How many yards are in a 60 pound bag of concrete?
- 2 How many bags of quikrete do I need for a 10×10 slab?
- 3 How much does a bag of concrete make?
- 4 How much concrete does a bag of quikrete make?
- 5 How many bags of concrete do I need for a fence post?
- 6 How many bags of cement do I need for 1 yard?
- 7 How much area does a 50 lb bag of quikrete cover?
- 8 How many square feet does a 80lb bag of quikrete cover?
- 9 Is gravel needed under concrete?
- 10 How many bags of concrete do I need for 1 cubic meter?
- 11 How many 80lb bags of concrete make a yard?
- 12 How far does a 25kg bag of concrete go?
- 13 Can you pour concrete directly on dirt?
- 14 How many bags of concrete can a mixer hold?

## How many yards are in a 60 pound bag of concrete?

**60 pound bag** yields.017 cubic **yards**.

## How many bags of quikrete do I need for a 10×10 slab?

For a **10 x 10 slab**, you **would need** 77 60-pound **bags** or 60 80-pound **bags**. If we add an extra 10%, that’s an extra 8 60-pound **bags** or 6 80-pound **bags**. Whatever the size of your project, use the formula above to calculate how **much concrete** you’ll **need**!

## How much does a bag of concrete make?

one 20kg **bag** will cover an area of 1.1m2 to a depth of approximately 10mm. or 108 x 20kg **bags** equates to one cubic metre of mixed **concrete**.

## How much concrete does a bag of quikrete make?

One 80lbs **bag of Quikrete Concrete** Mix will yield approximately. 60 cu ft. So it will take 45 **bag** to equal one cubic yard of **concrete**. If you have a project over a 1/2 a cubic yard you **should** consider our Mix On-site **Concrete** especially if you are hand mixing.

## How many bags of concrete do I need for a fence post?

Most **fence post** holes will need between 1 – 4 **bags of concrete** to securely hold the **post** in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the **fence post**. Depth of the hole is one-third to half the above ground height of the **fence post**.

## How many bags of cement do I need for 1 yard?

# It takes approximately 5 **Bags** of Portland **cement**, 8 cubic ft of sand, and 20 cubic ft of gravel to make approximately **1** cubic **yard** (27 cubic feet) of concrete.

## How much area does a 50 lb bag of quikrete cover?

One **50-pound bag of Quikrete** Fast Setting **Concrete** Mix yields about. 375 cubic feet. For example, if you need to **cover** 33.333 cubic feet, using 60-**pound** bags of **concrete**, divide 33.333 cubic feet by. 45 cubic feet to get 74.07 total bags of **concrete**.

## How many square feet does a 80lb bag of quikrete cover?

4 **sq feet** in that amount of cement.

## Is gravel needed under concrete?

Whether you pour **concrete** for a walkway or patio, a strong **gravel** base is required to prevent the **concrete** from cracking and shifting. **Gravel** is especially important in clay soil because it doesn’t drain well, which results in water pooling **under** the **concrete slab** and slowly eroding the soil as it finally drains.

## How many bags of concrete do I need for 1 cubic meter?

48 rounded **bags** of ready-mixed **concrete** of 40 kg each or a total of 1,920kg of ready-mixed **concrete** per **cubic meter** are required.

## How many 80lb bags of concrete make a yard?

**how many 80lb bags of concrete** are in a **yard**? You will need 45 **bags of concrete** mix to **make** a cubic **yard** of **concrete**. There’s 27 cubic feet of **concrete** in a cubic **yard**.

## How far does a 25kg bag of concrete go?

As a rule of thumb 1 of our **25kg bags** will cover an area of 0.25m to a recommended depth of 50mm. We also offer 855kg bulk **bags**.

## Can you pour concrete directly on dirt?

Long story short, yes **you can pour concrete** over **dirt**.

## How many bags of concrete can a mixer hold?

Heavy-duty paddles mix the **concrete** to a uniform consistency. This **concrete mixer can** fit up to two **bags of concrete**.