# Question: How Many Square Feet In A 60 Lb Bag Of Concrete?

## How many sq ft Does a 60 lb bag of concrete cover?

60 cubic feet. One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about. 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60pound bags of concrete, divide 33.333 cubic feet by.

## How many bags of quikrete do I need for a 10×10 slab?

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that’s an extra 8 60-pound bags or 6 80-pound bags. Whatever the size of your project, use the formula above to calculate how much concrete you’ll need!

## How many square feet is an 80 pound bag of concrete?

4 sq feet in that amount of cement.

You might be interested:  Often asked: Drilling Into Concrete Floor?

## How many bags of concrete do I need calculator?

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields.011 cubic yards. 60 pound bag yields.017 cubic yards.

## Can you pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

## How many bags of concrete do I need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

## Can you use quikrete for a slab?

Concrete is one of the most economical, versatile and durable building materials available. Build a sidewalk, patio, or floor with QUIKRETE concrete mixes no matter your skill level.

## Is gravel needed under concrete?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

## How much does it cost for a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between \$888 and \$1,584, with professional labor and materials included.

You might be interested:  FAQ: What Kind Of Paint For Concrete Floor?

## How many bags of cement do I need for 1000 square feet?

About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home. Sand is not only required for preparing RCC, mortar and plaster but also used for filling and flooring too. Sand consumed is about 1200 cubic ft.

## How many bags of cement do I need for 100 square feet?

4 bags ( 401 kg) of cement and 1593 nos bricks are required for 100 square feet 13.5 inch brick wall.

## How many square feet is 18 cubic feet?

Cubic feet to Square feet Calculator

1 cubic feet = 1 ft2 1 cubic feet
15 cubic feet = 6.0822 ft2 58.0948 cubic feet
16 cubic feet = 6.3496 ft2 64 cubic feet
17 cubic feet = 6.6115 ft2 70.0928 cubic feet
18 cubic feet = 6.8683 ft2 76.3675 cubic feet

## How thick should a concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

## How much does 2 yards of concrete cost?

According to the NRMCA – Ready Mixed Concrete Industry Data Survey, the average cost of concrete in 2018 was \$120 per cubic yard, or \$240 for the 2 cubic yards needed for a typical 10-by-10-foot patio.

Bulk Concrete Prices.

Cubic Yards Price Range
1* \$140-\$200
2* \$280-\$400
3* \$420-\$600
4* \$560-\$800
You might be interested:  Quick Answer: How To Secure A Post To Concrete?

## How thick should a concrete driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.