Question: Concrete Floor Installation?

How do you lay a concrete floor?

  1. Once your floor is clean, level and crack-free, mix the self-levelling cement with water or an acrylic polymer liquid, depending on the product manufacturer’s instructions, in a large bucket.
  2. Pour the mixture onto the cleaned floor, using a steel trowel to spread it in an even layer across the floor’s surface.

Are concrete floors expensive?

Cost ranges from downright cheap ($2 per square foot) to relatively pricey ($30 per square foot, depending on finishes). Obviously, concrete is heavy. If you’re putting in new concrete floors on grade, the weight won’t be a concern.

How long does it take to install concrete floors?

Installing concrete floors can take anywhere from two days to a week, depending on what you need done. Some of the factors that can impact how long it will take to install concrete floors are: The size of the space. The stain or finish.

Do you need rebar for 4 inch slab?

No, you do not need rebar for a 4inch slab of concrete on grade. A 4inch-thick slab cast on the ground and in permanent contact with it will float and rebar is not required. Rebar is recommended on concrete measuring 5 – 6 inches thick.

You might be interested:  FAQ: Installing Cabinets On Concrete Floor?

How deep does a concrete floor need to be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

Is concrete floor cheaper than tile?

Tile will usually cost under $5 per square foot which means in many cases, tile will either be cheaper than concrete or hover right around the same price. Of course, with higher quality materials comes a higher price tag but people expect that. In general, concrete and tile should cost you about the same.

Can I pour concrete over existing concrete?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

Is polished concrete cheaper than tiles?

This is because of the complicated steps involved to create the smooth and consistent finish you are after. Compare that to polished concrete look floor tiles, which cost a fraction of the price at TFO. Even including the cost of installation, it would be much cheaper to use concrete look tiles.

Can I put concrete floors in my house?

It’s not just for sidewalks; concrete is a stylish choice for indoor floors. Its surface can be finished in various ways—with colors, stains, and aggregates—and given a textured surface or buffed until glassy. Concrete floors are extremely durable and easy to clean, and they resist water when properly sealed.

You might be interested:  Quick Answer: What Is Cheaper Concrete Or Asphalt?

How do you insulate a concrete floor?

Insulation above a concrete floor



Lay the damp proof membrane onto the concrete, followed by the insulation. Then lay moisture-resistant chipboard, or a concrete screed to the top, which can then be covered by the flooring to finish.

How long do stained concrete floors last?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

Are concrete floors bad for your health?

According to experts, concrete floor systems can cause everything from bunions and ingrown toenails to shin splints, lumbar strain, and achilles tendonitis. It can also lead to lower back pain, stress fractures, knee pain, and worsening of arthritis symptoms.

Are concrete floors easy to maintain?

View in gallery Easy to maintain. Concrete flooring requires minimum maintenance. You just seal or wax it every 3-9 months and you use a neutral cleaning agent periodically. It’s easier than with wood floors, that’s for sure.

Is polished concrete slippery?

Is polished concrete slippery? Generally speaking, it is no more slippery than other hard flooring surfaces. Add water to it though and like any other hard surface it will be slippery. As a general rule Mechanically Polished Concrete is slip resistant – but like many other flooring options it will be slippery when wet.

Leave a Reply

Your email address will not be published. Required fields are marked *