Often asked: How To Install Engineered Wood Flooring On Concrete Slab?

Can engineered flooring be installed on concrete?

Engineered hardwood can be installed on concrete using the glue-down installation method. We recommend using an acrylic or urethane wood adhesive, such as Bostik Pro-Cure or East Bay Clipper. Before installing any flooring you must follow the instructions set forth by the flooring manufacturer.

Is it better to glue or float an engineered wood floor?

As an installation method, glued down is most suited for either concrete or wood subfloors. If you are trying to decide between the two, then for engineered wood flooring floating is usually the best option as you can install it quickly and don’t have to worry about which glue to use and how long to wait for it to dry.

How do you prepare a concrete floor for engineered hardwood?

Typically, the floor must be level and uniform within 3/16 inch every 10 feet. Check your wood flooring manufacturer’s recommendations and sand any high spots with a concrete grinder. Fill any low spots with a cementitious leveling compound following the manufacturer’s directions and allow it to dry before proceeding.

Can you float engineered hardwood over concrete?

A floating engineered wood flooring installation on concrete can be an excellent choice if your subfloor is below grade. Gluing works well when you are installing engineered hardwood over a concrete subfloor, but be sure you clearly understand the manufacturer’s application instructions before you glue that floor.

What is the best method to install engineered hardwood flooring?

3/4″ thick, engineered planks should be nailed or stapled using a 3/4″ solid wood flooring nailer or stapler of any brand. You must use the recommended size staple or cleat for 3/4″ solid wood installations; you must also use the recommended nailing schedule, which is 1″ to 3″ from the ends, and 8″ to 10″ in the field.

Do you need a moisture barrier under engineered hardwood?

Installation. If you‘re planning to nail down your hardwood floors, a moisture barrier is recommended. If you are installing an floating engineered hardwood flooring, you can use Aquabar underlayment to help control moisture.

Does engineered hardwood add value to your home?

YES! Engineered hardwood is the “real deal,” just like solid. There aren’t many differences between the ROI of these two products. This product increases a home’s value in a few ways: You’ll recoup 70% to 80% of your investment as seen in your property values.

Do you need to glue engineered wood flooring?

Engineered wood flooring can be “floated” on an underlay or can be mechanically fixed to the sub-floor by means of permanently elastic glue. Engineered wood flooring can be either a click/lock system that does not require glue or tongue and groove that does require glue in the header and longitudinal joints.

Should floating floors move when walking on them?

Floating wood floors typically require that the substrate, or subfloor, be flat to within a certain tolerance. Note, though, that with a floating floor you will always have a certain amount of movement, as it is installed over a pad. When you walk, the pad compresses and the floor will move.

Do I need a vapor barrier between concrete and wood flooring?

Do I need a vapor barrier for hardwood floors?” The answer is YES! Moisture can destroy hardwood flooring. It causes cupping, warping, and even mildew if not treated. You must install a moisture barrier to protect your flooring from water wicking up from below.

Do you need a subfloor on concrete?

While a subfloor is not necessary to add structural strength when you‘ll be laying finish flooring on top of a concrete slab (as in a basement remodel), subflooring over concrete offers two other advantages: A subfloor will help insulate against a concrete floor that becomes overly cold in winter.

Do I need underlay under engineered flooring?

Standard wood underlay should only be used with engineered flooring. It is always best to ensure your sub floor is dry by using a floor moisture meter before laying the underlay as the moisture will lay underneath the underlay and could move sideways into your walls.

What is the best flooring to put over concrete?

Best Flooring for Concrete Slab Foundation

1. Engineered Wood. Natural hardwood flooring offers undeniable beauty and durability.
2. Vinyl. As a longstanding choice for kitchens and bathrooms, vinyl has a reputation for extreme water resistance.
3. Laminate.
4. Carpet.
5. Tile.

Should you glue a floating floor?

Floating laminate floors are not intended to be glued down. Floating laminate floors can move with temperature, and gluing down the planks can damage them. If installing in a wet area, like a bathroom, you should glue the laminate planks to seal the tongue and groove seams from moisture.

Do floating floors settle over time?

Newly laid laminate, AKA “floating” flooring, often takes a few months to settle. (Of course, should it still have the initial amount of bounce after that time, call your contractor back to come take a look at the floor.)