- 1 Is it OK to power wash stamped concrete?
- 2 How do you keep stamped concrete shiny?
- 3 What happens if you don’t seal stamped concrete?
- 4 How long does stamped concrete last?
- 5 Why is my stained concrete turning white?
- 6 How often should you reseal stamped concrete?
- 7 Can you redo stamped concrete?
- 8 What is the best stain for concrete patio?
- 9 How do you fix stained concrete patio?
- 10 Is it better to spray or roll concrete sealer?
- 11 What makes concrete shiny?
- 12 When should I wash off stamped concrete?
Is it OK to power wash stamped concrete?
Never use a pressure washer to clean your stamped concrete. Over time the high pressure breaks down the sealer and reduces the protection, the shine and expected life of the sealer. Always use a gentle cleaner when washing stamped concrete.
How do you keep stamped concrete shiny?
Once you clean a stamped concrete surface, it is important to keep it free from dirt, leaves, and other debris that might scratch the surface. Use a broom, leaf blower, or garden hose to remove debris weekly. Reseal the surface every 2-3 years. A sealer will protect the color and sheen of your stamped concrete surface.
What happens if you don’t seal stamped concrete?
An unsealed, decorative stained concrete surface will show faded colors in a matter of a few months. You could advise your customer that’s what happens with an unsealed project and let them make the decision about sealing, but rest assured that an “I told you so,” from you when the fading happens will not comfort them.
How long does stamped concrete last?
Provided it’s installed correctly and adequately maintained, stamped concrete will last just as long as non-stamped, or standard, concrete—about 25 years. That’s because the processes of installing stamped concrete and standard concrete are mostly the same.
Why is my stained concrete turning white?
Why is my concrete turning white? Efflorescence is a white salty residue caused when too much moisture is moving through the concrete. As the concrete dries and its moisture rises upwards through the slab, it brings salts within the concrete to the surface as well.
How often should you reseal stamped concrete?
Stamped concrete should be resealed every 2 to 3 years, depending on your weather conditions.
Can you redo stamped concrete?
Most seals will last for a minimum of 3 years but can work for up to 10 years. Once your patio, driveway, or other stamped concrete slab is resurfaced, it will come back to life. Professionals can repair any damage if needed, and before you know it, your friends and neighbors will be complementing your new concrete.
What is the best stain for concrete patio?
WHAT IS THE BEST PATIO STAIN?
- Reactive Concrete Stain Ready to use. Produces translucent, variegated, and other effects.
- Stone Tone Stain 10 color options. Resistant to chipping and fading.
- Concrete Acid Stain BRICKFORM Blush-Tone Acid Stain available in 10 standard colors.
How do you fix stained concrete patio?
Pour the vinegar over the stain, let sit for 10 minutes, then scrub with a stiff nylon brush. Rinse and repeat if the concrete doesn’t come clean. For old or large rust stains, use commercial rust remover.
Is it better to spray or roll concrete sealer?
For large scale applications sprayers are faster and more efficient; whereas paint rollers are less expensive and are more readily available. If you are going to be applying a decorative acrylic sealer or an epoxy floor coating it is best to use a 1/4″ or 3/8 nap roller.
What makes concrete shiny?
A glossy sealer creates a shiny surface, and an acrylic wax adds an additional protective coat. Polyurethane and epoxy sealers resist abrasion, stains and heavy traffic particularly well, but water-based acrylic sealers are less expensive and easier to apply.
When should I wash off stamped concrete?
Depending on weather conditions and concrete curing, wash off excess release agent in the next 1-3 days. Mix dish soap with water, and use a scrub brush or broom to remove approximately 75% of the excess powder release agent.