Often asked: How Much Does It Cost To Acid Stain Concrete?

Is it cheaper to tile or stained concrete?

Staining a concrete floor typically costs less than tiling. Installing ceramic or porcelain tile costs on average between $15 and $20 per square foot.

Can you acid stain old concrete?

The answer is: yes, you can acid stain old concrete. The process for acid staining old concrete is not all that different from staining new concrete with a few exceptions. Below, we will walk you through how to stain old concrete and the differences from how to stain new concrete.

How much does it cost to dye concrete?

Cost of Colored Concrete

Colored Concrete Costs	Zip Code	Sq. ft.
	Basic	Better
Colored Concrete – Installation Cost	$450.00 – $535.00	$645.00 – $960.00
Colored Concrete – Total	$635.00 – $740.00	$879.00 – $1216.00
Colored Concrete – Total Average Cost per square foot	$6.88	$10.47

Are stained concrete floors expensive?

Here are the base prices for popular concrete floor finishes: Stained Concrete Cost – $2 to $4 per square foot. Concrete Overlay Cost – $3 to $7 per square foot. Polished Concrete Cost – $3 to $12 per square foot.

Does stained concrete floors add value to your home?

Getting concrete floor coatings or a decorative concrete overlay is not a luxury – it’s an investment that can pay off over time. Not only will the investment improve your enjoyment of the home and reduce your maintenance, but it will also improve the value of your home.

Is stained concrete flooring a good option?

Concrete floors are a great alternative to linoleum, carpet, wood, tile, stone or marble flooring. Concrete can be stained nearly any color, resurfaced in a variety of textures and finishes, or polished for a smooth, shiny look. Plus, concrete flooring is durable, long-lasting and easy to clean and maintain.

How long does concrete acid stain last?

With stained concrete, the concrete itself will last for many years, potentially over 100 years. However, in order for the stain to last, the floors will need to be sealed or waxed once or twice per year.

How long do I leave acid stain on concrete?

Drying time(final coat)- 4 hours minimum to overnight to 24 hours. Neutralizing and Cleaning the Residue from the Acid Stain will take one neutralizing and rinsing twice. Allow to completely dry for Clear Shield water base sealers.

Is it hard to acid stain concrete?

While the process for how to acid–stain concrete is fairly straightforward, each step should be performed carefully before going on to the next step. Concrete should be fully cured before applying acid stain, so if your surface is new, wait a minimum of 14 days before staining.

What is better concrete dye or stain?

Dyes contain very fine color pigments, much smaller than stains. They are solutions, similar to ink, and can easily penetrate into tight concrete. Most are water-based but there also are solvent-based dyes, usually with acetone or alcohol.

Is it better to stain or paint concrete floors?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

Is staining concrete cheaper than carpet?

Affordable – Generally, stained concrete is cheaper than wood, laminate or carpeting – particularly if your concrete is new and in good condition, and if you don’t have to rip up any existing flooring. The cost to hire a professional usually ranges from about $2 to $4 per square foot.

Which is better epoxy or stained concrete?

Both stained concrete and Nature Stone flooring will last for years with proper care, but stone epoxy tends to be slightly more durable than stained concrete. The reason for this is because the sealant used on top of stained concrete wears down faster than stone epoxy.

What is the best finish for concrete floors?

Top Concrete Finishing Options

• Acid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish.
• Water-Based Stain.
• Fast Stain.
• Acrylic Sealer.
• Standard Epoxy.
• Metallic Epoxy.
• Terrazzo or Granite Epoxy.
• Quartz Sand Epoxy.

Is stained concrete slippery?

Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.