How To Make Tomato Cages From Concrete Wire?

What diameter should a tomato cage be?

Cages should be 14-18 inches in diameter with a height of 4 feet for determinate plants and at least 6 feet for indeterminate. Sturdy cages may be expensive to purchase, but can be constructed by hand using cost-effective livestock fencing or concrete reinforcement wire.

How do you cut tomato cage wires?

The hands-down easiest cutting method is to use a small pair of bolt cutters like the ones pictured. I bought these 12-in. bolt cutters for just $10. They cut through the wire with very little pressure.

Can I use chicken wire for tomato cages?

However, larger tomato plants require something a bit sturdier, such as homemade wire cages. Of course, you can also choose to recycle poultry fencing (chicken wire) into makeshift tomato cages too. Using what you have on hand can be a very cost effective method for tomato cage construction.

What can I make out of tomato cages?

Remesh is flexible but strong. For example, it is easier to bend remesh into a tomatocage size cylinder than hog panel fencing, but it is also far more rigid than most rolls of wire fencing available. In 7 by 3.5 foot panels, remesh is already a perfect size to make a large tomato cage.

You might be interested:  Quick Answer: How To Remove Paint From Concrete Garage Floor?

Is it better to stake or cage tomatoes?

If you want to grow indeterminate tomatoes in containers, it is best to grow them near a trellis or fence that you can train them up, or use very large pots that will allow large cages. Dwarf (or patio) tomatoes never need staking, but they only grow two or three feet tall and produce small tomatoes (cherry size).

Can you grow tomatoes without cages?

No-stake tomatoeswithout cages or stakes, grow tomato directly on the ground! Growing tomatoes without stakes or cages allows for an abundant harvest: one plant will give you a production equivalent to three staked tomatoes.

When should I put tomato cages on?

After you first plant your tomato plants, you need to place a tomato cage around it. Setting the cage early will allow the tomato’s roots to grow uninterrupted. Placing the cage in the soil when the plant has matured can damage the tomatoes, the roots and vines.

How do you support a tomato plant with string?


  1. Run a wire, pipe or stake between two 8′ high stakes.
  2. Tie a string every 12″- 18″ so it hangs down towards the soil.
  3. Secure the string to the soil at the base of your tomato with a garden pin by winding the string around the pin and shoving it in the soil.
  4. Remove any suckers that have formed.

Can you spray paint tomato cages?

Following the directions on the spray paint can, spray a layer of color on the tomato cage. Wait until the layer of paint is dry, then turn the tomato cage over. Spray paint that side. Wait for the paint to dry fully, then stick the tomato cage in the ground.

You might be interested:  FAQ: What Is Concrete Made Of Chemically?

How do you cut a tomato ring?

1. Tomato Slices

  1. Place the tomato on its side so that the stem end faces to the left or right.
  2. Cut off a small slice of the tomato parallel to the stem and top of the tomato to trim that part off.
  3. Keep making parallel cuts toward the bottom of the tomato to form slices.

Leave a Reply

Your email address will not be published. Required fields are marked *