Contents

- 1 How many 80 pound bags of Quickcrete make a yard?
- 2 How many bags of cement do I need for 1 yard?
- 3 How many bags of concrete do I need for a 10×10 slab?
- 4 How many square feet does a 80lb bag of quikrete cover?
- 5 How many bags of concrete do I need for a post hole?
- 6 How many bags of concrete is 2 yards?
- 7 How many cubic feet is a 5 gallon bucket?
- 8 How much area does a yard of concrete cover?
- 9 What is a cheaper alternative to concrete?
- 10 How many cubic feet are in a 60 pound bag of concrete?
- 11 Can you pour concrete directly on dirt?
- 12 How many bags of cement do I need for 100 square feet?
- 13 How many bags of quikrete make a yard?

## How many 80 pound bags of Quickcrete make a yard?

Each **80 pound bag** yields 0.6 cubic feet. There are 27 cubic feet in a cubic **yard**. Thus, it requires 45 **bags** to yield 1 cubic **yard**.

## How many bags of cement do I need for 1 yard?

# It takes approximately 5 **Bags** of Portland **cement**, 8 cubic ft of sand, and 20 cubic ft of gravel to make approximately **1** cubic **yard** (27 cubic feet) of concrete.

## How many bags of concrete do I need for a 10×10 slab?

For a **10 x 10 slab**, you **would need** 77 60-pound **bags** or 60 80-pound **bags**. If we add an extra 10%, that’s an extra 8 60-pound **bags** or 6 80-pound **bags**.

## How many square feet does a 80lb bag of quikrete cover?

4 **sq feet** in that amount of cement.

## How many bags of concrete do I need for a post hole?

Mix two 50lb **bags of concrete** with water in a mixing tub or 5-gallon bucket. Add **concrete** into the **hole** and around the 4” x 4”. Depending on your climate, let **concrete** set up for 24 – 48 hours.

## How many bags of concrete is 2 yards?

On average, it will take 90 40lb **bags**, 60 60lb **bags**, or 45 80lb **bags** to fill one cubic **yard** of **concrete**.

## How many cubic feet is a 5 gallon bucket?

Since a one-**gallon pail** is equal to 0.134 **cubic feet**, a standard five-**gallon bucket** equals exactly 0.67 **cubic feet**. We’ll explain how we arrived at that number, what exactly is a **cubic foot**, how you can calculate it yourself and some uses for **the five**–**gallon bucket**.

## How much area does a yard of concrete cover?

One Cubic Yard of Concrete: 4-inches thick – covers 81 **square feet**.

## What is a cheaper alternative to concrete?

There are a few different types you can find in the home improvement store that can replace concrete cement used for driveways and walkways. These include **pea** gravel, crushed stone, and quarry process. Cheaper than other surface materials and low-**cost** to install.

## How many cubic feet are in a 60 pound bag of concrete?

15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields. 30 cubic feet, 60 pounds of concrete mix yields. **45 cubic feet** and an **80**-pound bag yields. 60 cubic feet.

## Can you pour concrete directly on dirt?

Long story short, yes **you can pour concrete** over **dirt**.

## How many bags of cement do I need for 100 square feet?

Ans.:- 7.6 no of **cement bags** (381.30 kgs) are required for **100 sq ft** rcc roof slab 4 inch thick m20 grade concrete. Ans.:- 7.6 **bags** (381.30 kgs), 9.5 **bags** (476.10 kgs) & 11.4 **bags** ( 570.8 kgs) **cement** are required for **100 sq ft** rcc roof slab 4 inch, 5inch & 6 inch thick respectively in m20 grade of concrete.

## How many bags of quikrete make a yard?

One 80lbs bag of Quikrete Concrete Mix will yield approximately. **60** cu ft. So it will take **45 bag** to equal one cubic yard of concrete. If you have a project over a 1/2 a cubic yard you should consider our Mix On-site Concrete especially if you are hand mixing.