FAQ: How To Stain A Concrete Countertop?

Can you change the color of concrete countertops?

Color can be applied throughout the entire mix with integral pigments, or applied to the surface of cured concrete with stains or dyes. There are different brands of pigments, stains, and aggregate colors, so concrete countertops will always be unique.

What is the easiest way to stain concrete?

Dampen the area with water but do not let it puddle. Spray in an overlapping manner, maintaining a wet edge. Allow acid stain to react with the concrete floor for at least 6-hours. Clean residue and pour water on floor to approximate the final color.

How long should concrete countertops cure before staining?

Staining concrete is a great way to add color to an otherwise dull surface. The concrete staining process takes about 2 days, is moderately difficult and fairly affordable. New concrete should be fully cured before staining, which takes between 21 and 28 days.

Will concrete countertops crack?

A: Yes. Not always, but concrete countertops can develop hairline cracks. The cracks tend to be non-structural and result from the natural shrinkage of the concrete. However, some countertop cracks can be prevented.

Do concrete countertops stain easily?

Concrete countertops scratch & stain easily.



It is also highly absorbent and must be sealed before you can use it in your kitchen.

How hard is it to stain concrete?

IS IT HARD TO STAIN CONCRETE? Overall, staining concrete can look like a simple process. However, it is important to keep in mind that while your stain is permanent, so are your mistakes.

What is the cheapest way to stain concrete?

There are products on the market that will paint or resurface concrete but to go cheap, use the least expensive oil base stain or paint you can find. Mix the paint/stain with paint thinner in a 50-50 solution. That is one gallon of paint to one gallon of paint thinner.

Is it better to stain or paint concrete?

Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.

What is the best concrete countertop sealer?

Our Recommended 6 Best Concrete Countertop Sealer 2021

1. Black Diamond Stoneworks Wet Look Natural Stone Sealer.
2. Foundation Armor AR350 Wet Look Sealer | best sealer for concrete countertops.
3. Siloxa-Tek 8500 Penetrating Concrete Sealer.
4. Tuff Duck Concrete Countertop Sealer.
5. Miracle Sealants 511 Impregnator Sealer Reviews.

How soon can I seal concrete countertops?

A. If you are using the SiAcryl 14, you can begin sealing 4-5 days after pouring. If you are using an epoxy sealer you must make sure the concrete is 100% cured. This can take as long as 28 days, however, on a slab this thick you will usually be safe after 10 days.

Do concrete table tops stain?

Con: Stains



While counters made from cement will last for years, they are vulnerable to stains. You’ll need to regularly reapply sealer and wax to protect the surface and be sure to clean up spills and messes right away. But, if you’re used to tile, you’ll love not having the added job of cleaning grout lines.

Can you stain concrete after it dries?

Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.

What is the best concrete stain?

6 Best Concrete Stains

1. Kemiko Stone Tone Concrete Stain. View Deal.
2. User & Eco-Friendly Semi-Transparent Professional Grade Cement Stain. View Deal.
3. Acid Stain DIY Kit with 100% Acrylic Solvent Sealer.
4. VIVID Acid Stain – 1 Gal – Walnut.
5. TuffCrete Waterborne Acrylic Concrete Stain Paint.
6. Rust-Oleum 247162 Concrete Stain Spray.

How many coats of sealer do I need for concrete countertops?

Penetrating-type sealers will not add gloss but will protect. Apply two liberal coats with a brush or paint pad. Generally, additional coats will not affect appearance, but may leave a residue if over applied.