Contents
- 1 How much does it cost to resurface a concrete pool?
- 2 How do you refinish a concrete pool?
- 3 What is the best product to resurface a pool?
- 4 Can you reshape a concrete pool?
- 5 How much does it cost to resurface a 10 000 gallon pool?
- 6 Do gunite pools need to be resurfaced?
- 7 What do you put around pool concrete?
- 8 How do you fix cracks in concrete pool?
- 9 What is concrete overlay?
- 10 How often should I resurface my pool?
- 11 What is the longest lasting pool finish?
- 12 What is the smoothest pool finish?
- 13 Can I make my pool less deep?
- 14 Can I make my pool bigger?
- 15 How much does it cost to reshape a pool?
How much does it cost to resurface a concrete pool?
It can cost $10,000–$20,000 to resurface the interior finish of a concrete pool, which usually includes replacing the waterline tile at the same time. This cost depends on many factors, such as the type of interior finish and tile, the pool size, the area of the pool, and more.
How do you refinish a concrete pool?
How to resurface a pool deck (installation)
- Prepare & Repair. Etch, grind, or shot blast the concrete surface to make it porous.
- Clean & Prime. Pressure wash and let surface thoroughly dry.
- Mix Product. Following instructions, mix the product to prepare it for application.
- Apply overlay.
- Cure & Seal.
What is the best product to resurface a pool?
Choosing the Best Material for Pool Resurfacing
- Plaster. Plaster is the most common pool resurfacing material because it is the cheapest.
- Pebble. This resurfacing material is actually a mixture of rock pebbles and plaster, although pebbles cover most of the surface.
- Concrete. If you favor durability over aesthetics, then concrete is a good material for resurfacing.
Can you reshape a concrete pool?
Changing the depth and overall “footprint” or shape of a pool are two of the most common projects. However, swimming pools can be modified or upgraded in many other ways. Sunning ledges are quite popular today, and many owners are having them installed on existing pools.
How much does it cost to resurface a 10 000 gallon pool?
Typical costs: Re-plastering the interior surface of an average residential in-ground pool (10,000-20,000 gallons or 14’x28′ to 16’x32′ and 3.5′-5′ deep) with standard white plaster or marble-dust plaster (marcite) typically costs $2,500-$5,500, depending on the size, depth and shape of the pool, and local rates.
Do gunite pools need to be resurfaced?
On average, gunite swimming pools last 7 to 10 years before they need to be resurfaced. When that time comes, it’s important to know what options are available so that you can pick the best choice for your backyard space.
What do you put around pool concrete?
Pool deck resurfacing is a process that either repairs damaged concrete surfaces or updates their look. When applying an overlay product, the contractor is adding strength to your pool deck, patio or other surface. The overlay is typically a thin layer of cement, sand, polymer resins and other additives.
How do you fix cracks in concrete pool?
HOW TO FIX CRACKS IN YOUR CONCRETE POOL DECK
- Chisel out the crack to remove loose pieces of concrete.
- Clean the debris, including all dust and chips with a broom, shop vac or air compressor.
- Apply filler directly into cracks, checking periodically to see if it has settled.
- Allow the filler to cure over a 24-hour period.
What is concrete overlay?
Answer: A concrete overlay is a thin color concrete cement based products that go over existing concrete for repair or decorative reasons. Overlays can be applied as thin as a feather finish up to in most cases 3/4″ depending on the desired finish.
How often should I resurface my pool?
To determine how often your pool needs to be resurfaced will depend upon when it was installed and with what material it was made. Cement and plaster, for example, usually require resurfacing every three to seven years. Whereas more durable material can last as long as fifteen years before such a job is required.
What is the longest lasting pool finish?
Tile Finishes
Though tile is the most expensive pool finish and takes longer to install than plaster and aggregate, it’s the longest lasting pool surface. With proper application and minimal maintenance, tiles should never need to be replaced. Tile pool finishes come in ceramic, porcelain, glass and stone.
What is the smoothest pool finish?
PebbleFina® – provides the smoothest finish with superior strength and long-lasting durability, made from PTI’s smallest pebble. Choose from 11 different color options. PebbleBrillinace® – combines vibrant glass beads and natural stone to deliver a captivating finish and a uniquely brilliant water color.
Can I make my pool less deep?
In many cases, a pool remodel specialist can cut the water depth by several feet. Depending on a pool’s existing dimensions, it may even be possible to create an approximate configuration of a play or sports pool. By doing so, you will have an aquatic retreat that’s more economical and far more functional.
Can I make my pool bigger?
You can always make your swimming pool bigger at any given time. It could be because you want to enhance your home’s aesthetics or want your pool cover to fit. Whatever the reason, hire a dependable pool contractor that will enlarge the pool.
How much does it cost to reshape a pool?
Pool Remodeling vs. Removal vs. Replacement Costs
| Concrete Pool Project | Average Cost Range |
|---|---|
| Remodel Concrete Pool | $10,000 – $60,000 and up |
| Remove Concrete Pool | $5,000 – $15,000 |
| Fill in Concrete Pool | $3,500 – $5,000 |
| Replace Concrete Pool with Fiberglass Pool | $55,000 – $95,000 and up |