FAQ: How To Remove Hardwood Floor From Concrete?

What is the easiest way to remove hardwood floors?

Okay, so the fastest way to remove old hardwood floors is to cut the boards into smaller sections. This is helpful because hardwood planks are all different lengths and make it really tough to remove quickly. So cutting them into smaller pieces of wood, makes it easier to pry up.

How much does it cost to remove glue down hardwood floors?

Unless you should happen to hire the services of companies that specialize in flooring removal, plan on ten square feet per hour as a high guesstimate. National and local companies today generally charge between $ 2.50 and $ 3.50 per square foot.

How do you remove glued flooring?

  1. If there is still adhesive on the subfloor, use warm water and soap to soak the glue, then wipe away the excess.
  2. If water and soap won’t remove the remaining glue, hold a heat gun over the adhesive long enough to soften the glue and scrape it away.
You might be interested:  Concrete Floor Repairing?

Can you float a hardwood floor over concrete?

Versatile installation



Floating hardwood floors can be installed above, below, or on grade. Floating floors also work over just about any subfloor. Plywood, ceramic tile, linoleum floors, and concrete are no problem for a floating floor installation.

Is it difficult to remove hardwood floors?

If you are not planning to reuse the wood or donate it, it will be easier to remove by cutting into small sections. Flooring that is both glued-down and nailed will be the toughest to remove. Carefully set your saw to slightly less than the thickness of the flooring so you don’t damage or cut through your subfloor.

What is the best floor adhesive remover?

The Best Adhesive Removers

  1. BEST OVERALL: Goo Gone Original Liquid.
  2. BEST FOR TOUGH MESSES: 3M General Purpose Adhesive Remover.
  3. BEST FOR VEHICLES: Custom Shop Restoration Grease and Wax Remover.
  4. BEST FOR OIL AND GREASE: Oil Eater Original.

Can vinegar remove glue?

Use a soaked cloth and dab it repeatedly, saturating the glue. Let it soak in, then clean off with a rag. Vinegar can also remove unwanted hardened glue from plastic. Soak the area using only white vinegar, then work the glue away with a credit card, spatula, or similar edge.

How do I know if my flooring is glued down?

Check any thresholds or transition pieces because many snap into a track and can be easily removed. You can’t nail hardwood floor to concrete. So, If same hardwood floor is installed on concrete slab in first floor then most probably it is either glue down or floating floor.

You might be interested:  Question: How To Calculate Concrete Cost Per Square Foot?

How do you remove a glued subfloor?

Pull all the exposed nails from the loose plywood. Use a hammer to drive them back through the plywood and then pull them out from the top with the hammer. Pull all remaining nails out of the floor or floor joists using a claw hammer. If the nails break off, use diagonal pliers to remove them.

Is it better to glue or float hardwood floors?

As an installation method, glued down is most suited for either concrete or wood subfloors. If you are trying to decide between the two, then for engineered wood flooring floating is usually the best option as you can install it quickly and don’t have to worry about which glue to use and how long to wait for it to dry.

Should you glue a floating floor?

Floating laminate floors are not intended to be glued down. Floating laminate floors can move with temperature, and gluing down the planks can damage them. If installing in a wet area, like a bathroom, you should glue the laminate planks to seal the tongue and groove seams from moisture.

Should floating floors move when walking on them?

Floating wood floors typically require that the substrate, or subfloor, be flat to within a certain tolerance. Note, though, that with a floating floor you will always have a certain amount of movement, as it is installed over a pad. When you walk, the pad compresses and the floor will move.

Leave a Reply

Your email address will not be published. Required fields are marked *