FAQ: 1 Yard Of Concrete Covers How Many Square Feet?

How much concrete do I need for a 10×10 slab?

For a 10 x 10 slab, we’d suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

How many 80 lb bags of concrete are in a yard?

how many 80lb bags of concrete are in a yard? You will need 45 bags of concrete mix to make a cubic yard of concrete. There’s 27 cubic feet of concrete in a cubic yard.

How much concrete do I need for a 40×60 slab?

On average, the amount of concrete you will need for a 40×60 slab for a barndominium will be $9,500 to $14,400. This calculation takes into factor the area of the slab, the cost of the concrete mix, and the national average of labor and materials you will need for the job.

What is the cost of 1 yard of concrete?

How much is a yard of concrete? When estimating the cost of concrete, use $125 per yard as a ballpark figure. However, concrete prices differ by region, and you’ll have to pay a ready mix delivery fee, plus factor in labor charges if hiring a contractor.

How many square feet does 10 yards of concrete cover?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet. 5-inches thick – covers 65 square feet. 6-inches thick – covers 54 square feet.

How many bags of concrete makes a yard?

On average, it will take 90 40lb bags, 60 60lb bags, or 45 80lb bags to fill one cubic yard of concrete.

How many bags of cement do I need for 1 cubic yard?

Pure cement, sand and crushed rock all have about the same density, so a block of pure cement measuring 1 cubic yard of volume (about 3,600 pounds) will contain 45 bags of cement.

How much area does a 50 lb bag of quikrete cover?

One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about. 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60-pound bags of concrete, divide 33.333 cubic feet by. 45 cubic feet to get 74.07 total bags of concrete.

How many bags of concrete do I need for a post hole?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

How much would a 30 by 40 garage cost?

An average 30×40, 1,200 sq ft, metal garage costs between $22,800 and $30,000, or $19-$25 per square foot.

How do you price concrete work?

The cost of labor to pour concrete is $45 per hour. There can also be a delivery fee of $60. To have concrete poured and finished, it will cost $2.52 to $2.60 per square foot for the labor, and $2.83 to $3.57 per square foot for the concrete itself.

What is the difference between a concrete slab and a cement slab?

What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.

Can I pour a 2 inch concrete slab?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

How much does 20 yards of concrete cost?

Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost. There could be other fees for such things as Saturday concrete truck delivery and small loads.

Is mixing your own concrete cheaper?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.