Diy Stamp Concrete?

Can you stamp your own concrete?

Stamped Concrete DIY. The short answer is NO! Concrete, especially stamped concrete, is unforgiving and expensive in terms of materials and time. Unlike carpentry, plumbing, or electrical work, concrete doesn’t come apart and you can‘t come back tomorrow to finish if you run out of time or patience.

How do you make a concrete stamp?

A concrete stamp adds a stylized pattern to any concrete pour.



  1. Step 1: Prepare The Stone For The Mold.
  2. Step 2: Prepare the Mold.
  3. Step 3: Mix The Two-Part Rubber.
  4. Step 4: Spray The Mold With Stamp Release.
  5. Step 5: Pour the rubber mixture in the center of the mold.
  6. Step 6: Let The Rubber Set.

How long after pouring concrete can you stamp it?

“But, in general, when you can touch the concrete and not have any sand on your hand, it’s about time, when that laitance is crusted enough, to put a release agent on there. Generally, it’s within an hour or two.” Frazier recommends getting enough stamps to cover at least the width of the slab.

You might be interested:  Quick Answer: How To Remove Vinyl Flooring From Concrete Slab?

Why is stamped concrete so expensive?

You begin by having the client or designer pick out three things; the stamp design, the color of the concrete, and the color of the release which gives the highlights. It can also be cost prohibitive for the contractor to purchase a set of stamps as they can run upwards of $4,000 for a complete set.

How much does a 20×20 stamped concrete patio cost?

The average cost for a stamped concrete is $5 to $12 per square foot, not including the concrete slab which costs $2 – $7 per square foot. Most homeowners spend a total of between $3,751 – $8,540 for stamped concrete patio. Get free estimates from concrete pros near you.

What is cheaper stamped concrete or pavers?

Cost is Key



In general, most sources suggest that the upfront cost of stamped pavement tends to be a more inexpensive option in relation to pavers. Long-term cost efficiency between the two however is relative to factors including proper installation, climate and periodic maintenance.

What material will not stick to concrete?

Paint – Paint is another material that has no natural bonding agents, so concrete generally won’t stick to it very well. OilOil or oiled surfaces are often used to make the surface resistant to concrete bonding.

Does stamped concrete crack?

Stamped concrete isn’t going to last forever. It will, eventually, start to crack and break down just like any other kind of concrete. However, stamped concrete is actually very resistant to cracking and, when you take steps to take care of it, it should hold up for a long time before it needs to be replaced.

You might be interested:  Readers ask: When To Seal New Concrete Driveway?

At what point do you stamp concrete?

If you leave a clean imprint about 3/16 to 1/4 inch deep, you can generally begin stamping. Another test is to place a stamp on the concrete and step on it. The stamp should hold your weight and not slide around or sink too deeply into the surface.

Can you stamp concrete without color?

Base color attained with color hardener or integral color is important, but the secondary color can be almost as important. The secondary or antiquing color is what gives stamped concrete the look of stone, tile or wood. Without secondary color, stamped concrete looks artificial and unattractive.

What is concrete release agent?

In the concrete construction industry, form release agents prevent the adhesion of freshly placed concrete to the forming surface, usually plywood, overlaid plywood, steel or aluminum. Barrier release agents prevent adhesion by the development of a physical film or barrier between the forming surface and the concrete.

What happens if you don’t seal stamped concrete?

An unsealed, decorative stained concrete surface will show faded colors in a matter of a few months. You could advise your customer that’s what happens with an unsealed project and let them make the decision about sealing, but rest assured that an “I told you so,” from you when the fading happens will not comfort them.

Can you power wash stamped concrete?

Never use a pressure washer to clean your stamped concrete. Over time the high pressure breaks down the sealer and reduces the protection, the shine and expected life of the sealer. Always use a gentle cleaner when washing stamped concrete.

You might be interested:  How Much Is 4 Yards Of Concrete?

Does stamped concrete add value?

By stamping concrete with the look of expensive stone, such as brick, cobblestones, or slate, you are able to add significant visual improvement with increased cost savings. Pavers. Although slightly more expensive than stamped concrete, brick paver patios allow for a timeless look and increased resale value.

Leave a Reply

Your email address will not be published. Required fields are marked *