Diy Polish Concrete Floor?

Can I polish my own concrete floor?

To polish concrete the do-it-yourself way, you’re going to need a concrete grinder. In addition, you’ll have to get your hands on an assortment of grinding discs (in a wide variety of grits, from 30 to 3,000) as well as polishing pads. Polishing concrete bears some similarities to sanding a hardwood floor.

How much does it cost to polish a concrete floor?

Polished Concrete Cost. Economical: You can expect to pay between $3 and $12 per square foot for polished concrete, depending on your location and the complexity of the project.

What can I use to polish concrete?

Apply a chemical hardener to densify the concrete. Polish with a 100- or 200-grit resin-bond diamond, or a combination of the two. Polish with a 400-grit resin-bond diamond. Polish with an 800-grit resin-bond diamond.

What does vinegar do to concrete?

Vinegar does not dissolve concrete itself but can degrade the cement that binds concrete together. As a weak, dilute acid, vinegar will cause only minor damage to concrete but can take the shine off polished surfaces. It can, however, be used to remove small amounts of cement from tools.

Can I polish my concrete basement floor?

Sources I’ve seen state that nearly any concrete floor can be polished, so long as it is structurally sound. Floors that are very porous, need extensive patching, or are wavy are probably not good candidates. New slabs need to cure for 28 days before polishing.

What do you put on concrete floors to make them shiny?

After you stain your concrete floor with the color of your choice, you should apply a concrete sealer. A glossy sealer creates a shiny surface, and an acrylic wax adds an additional protective coat.

Can you use regular sandpaper to polish concrete?

You can basically sand any type of concrete surfaces, regardless of whether it is a countertop, a floor, a wall, or a decorative object. However, be aware that you will need the right tools for the job: you can sand small and comparatively smooth surfaces by hand with regular or diamond sandpaper.

How do you make a concrete floor smooth and shiny?

To achieve a smooth and shiny concrete finish first requires proper leveling, floating, and troweling before it cures. After attaining a relatively smooth concrete surface, and once the concrete is dry, you can utilize either mechanical or chemical polishing methods to achieve a nice, glossy shine.

What is the best finish for concrete floors?

Top Concrete Finishing Options

• Acid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish.
• Water-Based Stain.
• Fast Stain.
• Acrylic Sealer.
• Standard Epoxy.
• Metallic Epoxy.
• Terrazzo or Granite Epoxy.
• Quartz Sand Epoxy.

Is polished concrete cheaper than hardwood?

It is possible for a “fancy” concrete floor to be more expensive than an economical hardwood floor. In general, a tight budget will find concrete floors more budget-friendly, but it depends on the design and finish of the concrete floor.

How long does it take to polish a concrete floor?

Depending on the area, the level of polish, and the obstacles, the polishing can take upwards of 2 to 3 days. However, you can use the surface immediately after the polishing is done.

Can you polish concrete with a floor buffer?

The finishing touch should be concrete polish. Use with the floor buffer all around the area. This polish seals the wax and creates the layer that you want to protect against dirty shoes and wheels. Apply evenly using the buffer, until you have covered the whole floor.

Is polished concrete cheaper than tiles?

This is because of the complicated steps involved to create the smooth and consistent finish you are after. Compare that to polished concrete look floor tiles, which cost a fraction of the price at TFO. Even including the cost of installation, it would be much cheaper to use concrete look tiles.

Is polished concrete slippery?

Is polished concrete slippery? Generally speaking, it is no more slippery than other hard flooring surfaces. Add water to it though and like any other hard surface it will be slippery. As a general rule Mechanically Polished Concrete is slip resistant – but like many other flooring options it will be slippery when wet.