Readers ask: What Is The Average Cost Of A Concrete Driveway?

How much will my concrete driveway cost?

Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.

Which is cheaper concrete or asphalt driveway?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.

How much does a typical driveway cost?

The cost to put in a new driveway averages $4,432, with a typical range between $2,381 and $6,490. For most types, you can expect to pay $2 to $15 per square foot for materials and installation. Driveway prices depend mostly on the material, which ranges from $1 to $50 per square foot, and the dimensions of the area.

You might be interested:  Question: How To Clean Motor Oil Off Of Concrete?

How much does it cost to pour a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

Does a concrete driveway increase property value?

You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.

How can I widen my driveway cheaply?

Alternatives to Concrete and Asphalt Installing stabilized gravel with permeable pavers, however, is the single cheapest and most effective solution to extending a driveway while providing long-term durability and functionality. TRUEGRID offers every type of paver you need to match your driveway situation.

What is the cheapest type of driveway?

Pound for pound, aggregate is the cheapest of these four common driveway materials. A basic gravel driveway can cost as little as $0.50 per square foot – an order of magnitude less than a professionally installed asphalt, stone, or concrete driveway. Durability. Aggregate is extremely durable.

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

You might be interested:  Often asked: How Does A Concrete Pump Truck Work?

What driveway surface is best?

Best surfaces for driveways

  • Resin -bonded gravel. For more complicated driveways, those that have a steep incline, or for anyone looking for a low-maintenance option, probably the best option (albeit the most expensive one) is resin -bonded gravel.
  • Nidagravel 140.
  • Tarmac planings.

How thick should a concrete driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Is it cheaper to pour concrete yourself?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

Is it cheaper to buy premixed concrete?

It’s cheaper to do all the prep and buy the concrete premixed and delivered. For example, a 10×20′ slab of 4″ concrete would be a minimum of 2.5-3 yards. Here concrete is about $80/yard (closer to $70), or $240 for the concrete. That same slab would take 223 40-pound bags, or 112 80-pound bags.

How much does a 20×20 concrete patio cost?

Cost to Install Concrete Patio by Size

Size in Feet Square Footage Price Range
12×14 168 $1,400 – $4,000
15×15 225 $1,800 – $5,500
16×18 288 $2,300 – $7,200
20×20 400 $3,000 – $10,000

Leave a Reply

Your email address will not be published. Required fields are marked *