Contents
- 1 How do you brace a post for concreting?
- 2 How long will a 4×4 post last in concrete?
- 3 How do you secure a pergola to concrete?
- 4 Can you put dry concrete in a post hole?
- 5 Can I pour concrete in a hole full of water?
- 6 How do you attach something to concrete without drilling?
- 7 Why deck posts should not be set in concrete?
- 8 How do you attach wood to concrete without drilling?
- 9 How long will a pressure treated 4×4 post last in the ground?
- 10 Do fence posts rot in concrete?
- 11 How deep do you bury a 4×4 post?
How do you brace a post for concreting?
Attach angled 2 x 4 braces to two adjacent sides of the post using one screw for each brace. Drive a stake into the ground near the lower end of each brace. 4. Use a level to position the post plumb (perfectly vertical), checking on two adjacent sides with the level, then fasten the braces to the stakes.
How long will a 4×4 post last in concrete?
5 Answers. A PT post will last a long time in concrete, maybe 5 to 10 years in soil alone. I suggest you embed the post in concrete, trowel a peak around the post so water runs off, and don’t let the PT post come in contact with the ground.
How do you secure a pergola to concrete?
- Step 1 – Locate Anchor Position. First, you will need to decide where the anchors are going to go.
- Step 2 – Drill Anchor Bolt Holes.
- Step 3 – Secure Metal Anchor.
- Step 4 – Place Post in Anchor.
- Step 5 – Drill Lag Bolt Holes.
- Step 6 – Secure Posts to Metal Anchor.
- Step 7 – Repeat for Each Post.
Can you put dry concrete in a post hole?
Fast-setting concrete is ideal for setting posts because there’s no mixing— you simply pour the dry concrete from the bag right into the hole, then add water. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.
Can I pour concrete in a hole full of water?
The good news is that you can pour the concrete in water. The biggest issue with pouring concrete under water is movement. If the water is moving, it can wash away the cement paste that’s holding the sand and gravel together. But if the water is calm, then it’s not a problem at all.
How do you attach something to concrete without drilling?
A simple fix might include an adhesive or adhesive-baked hook, while there are other fasteners like hard wall hooks and masonry nails. Powder-actuated fasteners and concrete nail guns are useful for supporting frames and providing a much greater hold.
Why deck posts should not be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. Concrete tends to absorb moisture and wood expands when it gets wet, so these two factors combined will result in the wood breaking the concrete.
How do you attach wood to concrete without drilling?
If you are willing to make holes in the concrete but do not want to buy the particular drill bit needed, then the simplest solution is to get nails for your project. Standard nails will not work on concrete, but some nails are made specifically for nailing wood to concrete. Cut nails will also work for this as well.
How long will a pressure treated 4×4 post last in the ground?
The treated post that are rated for ground contact are guaranteed for 40 years.
Do fence posts rot in concrete?
Unlike wooden fence posts concrete is not a degradable material and cannot be penetrated by rot or insect attack which is why people choose to opt for concrete over timber.
How deep do you bury a 4×4 post?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet ).