Readers ask: How Much Will One Yard Of Concrete Cover?

How much concrete do I need for a 10×10 slab?

For a 10 x 10 slab, we’d suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

How many 80 lb bags of concrete are in a yard?

how many 80lb bags of concrete are in a yard? You will need 45 bags of concrete mix to make a cubic yard of concrete. There’s 27 cubic feet of concrete in a cubic yard.

How do I figure out how many yards of concrete I need?

How do I calculate how much concrete I need for a slab?

  1. Measure the area in feet.
  2. Multiply length by width, and then by thickness.
  3. Divide the resulting number by 27 to find cubic yards.
You might be interested:  Quick Answer: How To Install Heated Floor Over Concrete?

How many bags of cement do I need for 1 yard?

# It takes approximately 5 Bags of Portland cement, 8 cubic ft of sand, and 20 cubic ft of gravel to make approximately 1 cubic yard (27 cubic feet) of concrete.

How much does a yard of concrete cost 2019?

How much is a yard of concrete? When estimating the cost of concrete, use $125 per yard as a ballpark figure. However, concrete prices differ by region, and you’ll have to pay a ready mix delivery fee, plus factor in labor charges if hiring a contractor. Get quotes from concrete contractors near me.

How thick should my concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

How many bags of concrete do I need for a post hole?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

Is it cheaper to mix your own concrete?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.

You might be interested:  Often asked: How To Install Threshold On Concrete?

How much area does a 50 lb bag of quikrete cover?

One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about. 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60- pound bags of concrete, divide 33.333 cubic feet by. 45 cubic feet to get 74.07 total bags of concrete.

How much is 4 yards of concrete cost?

Cost. Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost. There could be other fees for such things as Saturday concrete truck delivery and small loads.

How many bags of cement do I need for 100 square feet?

4 bags ( 401 kg) of cement and 1593 nos bricks are required for 100 square feet 13.5 inch brick wall.

How much does it cost to pour a 12×12 concrete slab?

How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.

How much does 2 yards of concrete cost?

According to the NRMCA – Ready Mixed Concrete Industry Data Survey, the average cost of concrete in 2018 was $120 per cubic yard, or $240 for the 2 cubic yards needed for a typical 10-by-10-foot patio. Bulk Concrete Prices.

Cubic Yards Price Range
1* $140-$200
2 * $280-$400
3* $420-$600
4* $560-$800

How many bags of concrete do I need for a 6×6 post?

As I recall, a 60 # bag of concrete is about. 5cf, so you’d need 3 bags per hole.

Leave a Reply

Your email address will not be published. Required fields are marked *