Readers ask: How Much Does Polished Concrete Cost?

Is a polished concrete floor expensive?

If you want a low maintenance, stone-style appearance then polished concrete could be ideal. Polished concrete typically costs anything from £80 per m2 to £150 per m2. This puts it in the same bracket as high-end stone floorings. But you won’t have to worry about the cost of screeding the floor first.

Is polished concrete cheaper than floorboards?

Timber floorboards, on the other hand, will nearly always be more expensive than polished concrete to install and will cost more to maintain in the long run. Similarly, floor tiles will cost more in time and effort to keep clean.

Can I polish an existing concrete floor?

Almost any structurally sound concrete floor, whether new or old, can be polished. However there are some exceptions, for example with new floors no special mix design is required to achieve good results – although the floor should be in place at least 28 days before polishing begins to ensure adequate curing.

You might be interested:  FAQ: Drylok Concrete Floor Paint?

What’s cheaper polished concrete or tiles?

This is because of the complicated steps involved to create the smooth and consistent finish you are after. Compare that to polished concrete look floor tiles, which cost a fraction of the price at TFO. Even including the cost of installation, it would be much cheaper to use concrete look tiles.

Is it cheaper to have concrete floors?

Economical. The cost of concrete floors is very low, about $2 to $6 per square foot to polish a plain gray slab, giving it a lustrous sheen. The concrete’s tonal differences, subtle cracks and aggregates take on a stonelike, natural feel. More elaborate finishes cost around $5 to $8 per square foot.

How long does it take to polish concrete?

Depending on the area, the level of polish, and the obstacles, the polishing can take upwards of 2 to 3 days. However, you can use the surface immediately after the polishing is done. For more information on polished concrete, or to get an estimate, you can contact us at The Floor Company.

Are concrete floors bad for your health?

According to experts, concrete floor systems can cause everything from bunions and ingrown toenails to shin splints, lumbar strain, and achilles tendonitis. It can also lead to lower back pain, stress fractures, knee pain, and worsening of arthritis symptoms.

Why is polished concrete so expensive?

The process of polishing concrete Grind and seal are the least expensive, because fewer grits are needed. Mechanically polished concrete must use finer and finer grits of concrete until the required gloss level is achieved. This is why it’s more expensive.

You might be interested:  How To Locate Drain Pipe Under Concrete Slab?

Is polished concrete slippery?

Is polished concrete slippery? Generally speaking, it is no more slippery than other hard flooring surfaces. Add water to it though and like any other hard surface it will be slippery. As a general rule Mechanically Polished Concrete is slip resistant – but like many other flooring options it will be slippery when wet.

Can you have polished concrete in bathrooms?

‘ Polished concrete can look nice in bathrooms – there’s no grout so it gives a very clean look. It’s easy to slip on a highly polished floor when wet though, so you need a finish with extra sanding to give it some texture,’ says the renovation specialist.

How much does it cost to polish a concrete garage floor?

Expect to pay $6 to $10 per square foot and up depending on the level of shine you want, the shape of your concrete, and the size of your garage floor. It can get more expensive if you want to stain the concrete as well.

Can you do polished concrete yourself?

To polish concrete the do -it- yourself way, you ‘re going to need a concrete grinder. Before burnishing one last time, put a thin coat of concrete sealer over the floor. The result will be a stone-like surface that gleams without the aid of floor waxes or oils.

Is Microcement cheaper than tiles?

Value for money. This material makes it possible to produce a concrete finish on almost any surface at a fraction of the cost and weight of real concrete. In some cases it is much more affordable than laying tiles.

You might be interested:  How To Install Linoleum On Concrete?

Is epoxy flooring cheaper than tile?

Overall, floor tiles will run you about $3 to $5 per square foot, while epoxy will cost you between $3 and $12 per square foot. Garage tiles average $2 to $4 per square foot, making the materials more expensive. However, the installation is less than $1 per square foot.

Leave a Reply

Your email address will not be published. Required fields are marked *