Contents
- 1 How many square feet will 80 lbs of concrete cover?
- 2 How much will an 80 lb bag of concrete cover?
- 3 How many cubic feet are in a 80 pound bag of concrete?
- 4 How much quikrete do I need for a 10×10 slab?
- 5 Can you pour concrete directly on dirt?
- 6 How much water do I mix with a 80 pound bag of quikrete?
- 7 How many bags of concrete do I need for a post hole?
- 8 How many cubic feet will 60 lb bag of concrete?
- 9 How much does a 60 lb bag of concrete cover?
- 10 How many 80 pound bags of concrete does it take to make 1 yard?
- 11 How many bags of cement do I need for 100 square feet?
- 12 How many bags of concrete do I need for a 6×6 post?
- 13 How many square feet will one bag of quikrete cover?
- 14 What is cheaper poured concrete or pavers?
How many square feet will 80 lbs of concrete cover?
4 sq feet in that amount of cement.
How much will an 80 lb bag of concrete cover?
bag provides 0.45 cubic feet of cured concrete. A 80 lb. bag provides 0.6 cubic feet of cured concrete. If you have concrete delivered it is sold by the yard (which is a cubic yard = 27 cubic feet).
How many cubic feet are in a 80 pound bag of concrete?
6 cubic feet for an 80 lb bag.
How much quikrete do I need for a 10×10 slab?
For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that’s an extra 8 60-pound bags or 6 80-pound bags. Whatever the size of your project, use the formula above to calculate how much concrete you’ll need!
Can you pour concrete directly on dirt?
Long story short, yes you can pour concrete over dirt.
How much water do I mix with a 80 pound bag of quikrete?
For each 80 lb (36.2 kg) bag of QUIKRETE Concrete Mix to be mixed, add approximately 6 pt (2.8 L) of fresh water to the mixer. Turn on the mixer and begin adding the concrete to the mixer. If the material becomes too difficult to mix, add additional water until a workable mix is obtained.
How many bags of concrete do I need for a post hole?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
How many cubic feet will 60 lb bag of concrete?
Each 60-pound bag of QUIKRETE® Concrete Mix will yield approximately 0.45 cubic feet of mixed concrete.
How much does a 60 lb bag of concrete cover?
15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields. 30 cubic feet, 60 pounds of concrete mix yields. 45 cubic feet and an 80-pound bag yields.
How many 80 pound bags of concrete does it take to make 1 yard?
how many 80lb bags of concrete are in a yard? You will need 45 bags of concrete mix to make a cubic yard of concrete. There’s 27 cubic feet of concrete in a cubic yard.
How many bags of cement do I need for 100 square feet?
4 bags ( 401 kg) of cement and 1593 nos bricks are required for 100 square feet 13.5 inch brick wall.
How many bags of concrete do I need for a 6×6 post?
As I recall, a 60 # bag of concrete is about. 5cf, so you’d need 3 bags per hole.
How many square feet will one bag of quikrete cover?
15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields. 30 cubic feet, 60 pounds of concrete mix yields.
What is cheaper poured concrete or pavers?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.