Contents

- 1 How many 80 pound bags of Quickcrete make a yard?
- 2 How many bags of cement do I need for 1 yard?
- 3 How many bags of concrete do I need for a 10×10 slab?
- 4 How many square feet does a 80lb bag of quikrete cover?
- 5 How many bags of concrete do I need for a post hole?
- 6 How many bags of concrete is 2 yards?
- 7 How many cubic feet is a 5 gallon bucket?
- 8 How much area does a yard of concrete cover?
- 9 What is a cheaper alternative to concrete?
- 10 How many cubic feet are in a 60 pound bag of concrete?
- 11 Can you pour concrete directly on dirt?
- 12 How much area does a 50 lb bag of quikrete cover?
- 13 How many bags of cement do I need for 100 square feet?

## How many 80 pound bags of Quickcrete make a yard?

Each 80 pound bag yields 0.6 cubic feet. There are 27 cubic feet in a cubic yard. Thus, it requires 45 bags to yield 1 cubic yard.

## How many bags of cement do I need for 1 yard?

# It takes approximately 5 Bags of Portland cement, 8 cubic ft of sand, and 20 cubic ft of gravel to make approximately 1 cubic yard (27 cubic feet) of concrete.

## How many bags of concrete do I need for a 10×10 slab?

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that’s an extra 8 60-pound bags or 6 80-pound bags.

## How many square feet does a 80lb bag of quikrete cover?

4 sq feet in that amount of cement.

## How many bags of concrete do I need for a post hole?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

## How many bags of concrete is 2 yards?

On average, it will take 90 40lb bags, 60 60lb bags, or 45 80lb bags to fill one cubic yard of concrete.

## How many cubic feet is a 5 gallon bucket?

Since a one- gallon pail is equal to 0.134 cubic feet, a standard five- gallon bucket equals exactly 0.67 cubic feet. We’ll explain how we arrived at that number, what exactly is a cubic foot, how you can calculate it yourself and some uses for the five – gallon bucket.

## How much area does a yard of concrete cover?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet.

## What is a cheaper alternative to concrete?

There are a few different types you can find in the home improvement store that can replace concrete cement used for driveways and walkways. These include pea gravel, crushed stone, and quarry process. Cheaper than other surface materials and low- cost to install.

## How many cubic feet are in a 60 pound bag of concrete?

Each 60-pound bag of QUIKRETE® Concrete Mix will yield approximately 0.45 cubic feet of mixed concrete.

## Can you pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

## How much area does a 50 lb bag of quikrete cover?

One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about. 375 cubic feet. For example, if you need to cover 33.333 cubic feet, using 60- pound bags of concrete, divide 33.333 cubic feet by. 45 cubic feet to get 74.07 total bags of concrete.

## How many bags of cement do I need for 100 square feet?

4 bags ( 401 kg) of cement and 1593 nos bricks are required for 100 square feet 13.5 inch brick wall.