Readers ask: Concrete Fence Posts?

How deep should a concrete fence post be in the ground?

The width of the post hole should be 3 times the width of diameter of the post. For example, if you are erecting a 6 foot high fence using 4 inch fence posts, the posts need to be 6 feet above the ground. 6 divided by 3 is 2, therefore the depth of the hole required is 2 feet.

Should you cement fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.

How much does a concrete fence post cost?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

You might be interested:  Often asked: How To Get Cat Pee Smell Out Of Concrete?

What’s the best concrete for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow. Once you’ve finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2×4.

Is 2 feet deep enough for fence posts?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/ 2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet ).

How do you keep fence posts from rotting in concrete?

Consider Adding Posts to Concrete From here, you should fill the hole with about 6 inches of gravel. This will prevent rotting by ensuring that the post is kept dry when water makes its way into the soil. Place the post in the gravel, then fill with a batch of cement until it reaches the top of the hole.

Will fence posts rot in concrete?

A: Actually, your point is well taken. Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.

Do I need gravel under my fence post?

Gravel is best for fencing in heavier (more clayey) soils, and won’t work well if you have loose, sandy soil. Gravel also allows water drainage around the fence posts, making the posts less susceptible to frost heaves. When setting fence posts in gravel, you should bury at least one-third of the fence post.

You might be interested:  Quick Answer: How Much Is 4 Yards Of Concrete?

Do I need gravel under concrete?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

How much concrete do I need for a post hole?

Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.

How long will a treated 4×4 post last in the ground?

The treated post that are rated for ground contact are guaranteed for 40 years.

Do you need concrete for mailbox post?

Most mailbox post installations require a 60 lb. bag of dry concrete. Pour a little more water on top of the concrete mix. The concrete mix in the ground will soak in both the water you poured earlier as well as the water from the top.

How many bags of concrete do I need for a 10×20 slab?

A 60-pound bag yields. 017 cubic yards, and an 80-pound bag yields. 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

How do I keep my post level while concrete dries?

Fill the hole up to a depth of 8 inches from ground level with 1/2-inch drainage gravel. Use rough-cut gravel with sharp edges. It will hold the post better than smooth rock.

You might be interested:  Question: How To Remove Concrete Stain From Brick?

How long does concrete take to set for fence posts?

The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.

Leave a Reply

Your email address will not be published. Required fields are marked *