Quick Answer: What Cleans Concrete Floors?

How do you clean unsealed concrete floors?

How to Clean Unsealed Concrete Floors

1. Sprinkle sawdust on grease and oil stains.
2. Sweep the floor with a push broom.
3. Dust mop or vacuum the floor.
4. Apply detergent and water on the stains.
5. Scrub the stained spots with a brush.
6. Mop with a baking soda solution.
7. Rinse and wipe the floor dry.

What is the best chemical to clean concrete?

Vinegar is the go-to natural cleaner and it works on patios. Mix it equal parts of vinegar and water to clean stains, or use full-strength vinegar on heavily soiled patios. Baking soda is another good natural cleaner. Mix 1/2 cup baking soda to one gallon of water for a gentle cleaning solution.

How can I make my concrete white again?

Apply vinegar or bleach to the discolored areas. If you use vinegar, do not dilute it. Pour it onto the concrete and scrub it into the surface with a scrub brush. If the discoloration starts to fade, repeat until it disappears completely.

Does white vinegar clean concrete?

Yes. Vinegar makes a great cleaner for stained concrete floors. Because of its acidity, you should dilute it 50/50 with warm water to avoid damaging the floors. However, you can use small amounts of full-strength vinegar for touch stains, followed by a quick water rinse.

Can vinegar clean concrete floors?

Cleaning Concrete Floors with Vinegar A natural, all-purpose cleaner, white vinegar is one of the best ways to clean concrete, especially if your floor has stubborn stains caused by mildew or grease. Vinegar also works as a phenomenal spot treatment and stain remover.

Does CLR damage concrete?

While CLR is generally safe and effective in removing calcium, lime and/or rust from concrete, ALWAYS spot test in an inconspicuous area first. If there are no adverse reactions between CLR and the concrete (change in colour or texture), it would be safe to use on the other affected areas of the concrete.

Does bleach clean concrete?

Concrete floors are commonly used in basements, patios and garages. Since these areas are prone to dirt, residue, mold or mildew, you should clean them with bleach. Bleach effectively removes many stains, deodorizes and kills mold and mildew when used properly.

Will straight bleach harm concrete?

When applied to concrete, bleach does not harm the sturdy material. It also disinfects concrete. When using bleach, work in a well-ventilated area because the fumes from bleach can be overwhelming. Depending on your cleaning project, you might combine the bleach with detergent, dilute it with water or use it straight.

Can you make old concrete look new?

The Easy Way to Make Old Concrete Look New! Do -it-yourselfers and contractors can use QUIKRETE® Concrete Resurfacer for large applications such as driveways, walkways, sidewalks and patios.

Does vinegar harm concrete?

Vinegar does not dissolve concrete itself but can degrade the cement that binds concrete together. As a weak, dilute acid, vinegar will cause only minor damage to concrete but can take the shine off polished surfaces. It can, however, be used to remove small amounts of cement from tools.

Does peroxide clean concrete?

Cleaning concrete outdoors: you can rent a pressure washer for use in combination with a biodegradable detergent. Cleaning concrete indoors: your supplies are likely to be a bucket, scrub brush, and detergent. Hydrogen peroxide or ammonia also work well too.

What can I use to clean my concrete basement floor?

If a concrete or concrete -block surface is especially dirty, add detergent and a quarter cup of ammonia to a bucket of warm water and brush the solution over the surface with a stiff nylon brush. (Never use a metallic brush; metallic fibers can get trapped in the concrete and rust.)

Can you use Pine Sol on concrete floors?

You can use Pine – Sol ® Cleaners on most concrete floors. Pine – Sol ® Cleaners are concentrated formulas that you dilute for most jobs. For general concrete cleanup, use a 24 oz. bottle of Pine – Sol ® for 12 gallons of cleaning power.

Will baking soda clean concrete?

Cleaning concrete with vinegar or baking soda is a good option if you are looking for a natural cleaner. While cleaning concrete with bleach or detergent can be effective, it can also be toxic to plants. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.