Quick Answer: How To Install Engineered Wood Flooring Over Concrete?

How do you install engineered wood flooring on concrete?

A T&G (tongue and groove) engineered floor can be installed by nailing it to a timber sub- floor using a flooring nailer, sticking it to a concrete floor using wood to concrete glue, or installed on an underlay and the edges glued using a quality wood PVA wood glue. The most common method is gluing.

Is it better to glue or float an engineered wood floor?

As an installation method, glued down is most suited for either concrete or wood subfloors. If you are trying to decide between the two, then for engineered wood flooring floating is usually the best option as you can install it quickly and don’t have to worry about which glue to use and how long to wait for it to dry.

You might be interested:  FAQ: How Much To Build A Concrete House?

What is the best method to install engineered hardwood flooring?

3/4″ thick, engineered planks should be nailed or stapled using a 3/4″ solid wood flooring nailer or stapler of any brand. You must use the recommended size staple or cleat for 3/4″ solid wood installations; you must also use the recommended nailing schedule, which is 1″ to 3″ from the ends, and 8″ to 10″ in the field.

Do I need underlayment for engineered hardwood flooring?

Underlayments pads are especially important for engineered floors or laminate floors which are installed via the floating method over wood or concrete subfloors. An underlayment is necessary for multiple reasons, floating floors will expand and contract, moving ever so slightly as a whole unit.

Can I float engineered wood over concrete?

A floating engineered wood flooring installation on concrete can be an excellent choice if your subfloor is below grade. Gluing works well when you are installing engineered hardwood over a concrete subfloor, but be sure you clearly understand the manufacturer’s application instructions before you glue that floor.

What is the best flooring to put over concrete?

Best Flooring for Concrete Slab Foundation

  1. Engineered Wood. Natural hardwood flooring offers undeniable beauty and durability.
  2. Vinyl. As a longstanding choice for kitchens and bathrooms, vinyl has a reputation for extreme water resistance.
  3. Laminate.
  4. Carpet.
  5. Tile.

Does engineered hardwood add value to your home?

YES! Engineered hardwood is the “real deal,” just like solid. There aren’t many differences between the ROI of these two products. This product increases a home’s value in a few ways: You’ll recoup 70% to 80% of your investment as seen in your property values.

You might be interested:  Question: How Long Does Self Leveling Concrete Take To Dry?

Should floating floors move when walking on them?

Floating wood floors typically require that the substrate, or subfloor, be flat to within a certain tolerance. Note, though, that with a floating floor you will always have a certain amount of movement, as it is installed over a pad. When you walk, the pad compresses and the floor will move.

Can you put wood flooring directly on concrete?

Solid parquet hardwood flooring can be glued directly to a concrete slab on grade or above grade with the use of a manufacturer recommended vapor retarder. Solid parquet should not be installed below grade. Successful installation also requires conducting a concrete slab moisture test before parquet installation.

What do you put under engineered wood flooring?


  1. Engineered Hardwood Floor Planks.
  2. Underlayment & Moisture/Vapor Barrier (as Required by the Flooring Manufacturer)
  3. Finish Nails.
  4. Floor Transitions & Moulding.
  5. Matching Wood Putty.
  6. Painters Tape.

How much does it cost to install 1000 square feet of engineered hardwood floors?

The average cost to install hardwood floors on 1,000 sq. feet is between $6,115 and $10,140 with most homeowners spending about $8,127 for materials and professional labor.

Can you walk on engineered hardwood floors after installation?

Engineered hardwood flooring can resist warping from changes in temperature much better than solid hardwood flooring, so you only need to wait a day before walking on it.

How much does it cost to install engineered hardwood?

The national average cost for materials for a typical engineered hardwood floor installation is $3.05 per square foot, ranging from $2.64 to $3.47. Adding in labor, you can expect to pay $8.14 on average per square foot, with a lower bound of $6.61 and a higher bound of $9.68.

You might be interested:  How To Attach A Post To Concrete?

Do I need to glue engineered wood flooring?

Engineered wood flooring can be either a click/lock system that does not require glue or tongue and groove that does require glue in the header and longitudinal joints. In this type of installation the new wood floor is not fixed to the sub- floor but is held in position by its own weight i.e. it is said to be floating.

Leave a Reply

Your email address will not be published. Required fields are marked *