- 1 What do you use for curved concrete forms?
- 2 How do you make bullnose concrete steps?
- 3 Do you need gravel under concrete sidewalk?
- 4 What do you use for concrete forms?
- 5 How much does concrete steps cost?
- 6 How do you level concrete steps?
- 7 What type of wood is used for concrete forms?
- 8 How do I build a concrete sidewalk?
- 9 What is best to fill cracks in concrete?
- 10 How much does it cost to resurface concrete steps?
- 11 How do you attach concrete to old concrete?
What do you use for curved concrete forms?
Masonite siding has often been an option for forming curves — it’s stiff, yet bendable. Landscape edging material made out of metal is what some contractors use because it’s easy to find. “Kerfs” or grooves in two-by-fours allow the wood to bend, or rip thinner plywood to the desired height.
How do you make bullnose concrete steps?
To create the bullnose, a form liner with the bullnose’s molded shape is placed into the concrete form. Once the form is attached, the concrete poured into the form cures to the shape of the installed liner mold. Rid your steps of sharp edges using bullnose form liners.
Do you need gravel under concrete sidewalk?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
What do you use for concrete forms?
Wooden boards have always been the go-to choice for concrete forms. However, not just any boards will do. A contractor must carefully consider the dimensions of the wood they use, otherwise, the results may not meet expectations.
How much does concrete steps cost?
On average, concrete steps cost around $2,000. Most projects range between $900 and $5,000. Where your price falls depends on the number of steps and the size of the staircase you need. Pouring cement is about $300 per step at 2 feet wide and 11 inches deep, including materials and labor.
How do you level concrete steps?
Use the concrete trowel to spread on the cement on the treads of the stairs or steps. Don’t make the cement too thick. Rather use just enough cement to fill in gaps or uneven spaces. Use a level or straight edge to find the areas where there are dips and gaps.
What type of wood is used for concrete forms?
Virtually any “Exterior” rated APA panel can be used for concrete formwork because all such panels are manufactured with moisture resistant adhesive. For concrete forming, the plywood industry produces a special product called Plyform®, which is recommended for most general forming uses.
How do I build a concrete sidewalk?
Use 1″ x 4″ x 4′ boards to create forms for the sides of the walkway. Drive wooden stakes along path at 4′ intervals, placing them just outside the planned pathway. Attach 1″ x 4″ x 4′ boards to the inside of the stakes with screws to create the form for the concrete. Make sure all form boards are plumb and level.
What is best to fill cracks in concrete?
Wide cracks in concrete are best patched and sealed with a concrete patching compound. Smaller cracks, less than 1/4 inch wide, can be repaired with a concrete caulk or liquid filler. Patching compounds typically are mixed with water and applied with a trowel.
How much does it cost to resurface concrete steps?
Nationally, the average cost for concrete resurfacing is $3 to $10 per square foot, depending on the condition of the original concrete and local labor costs. For smaller projects, some contractors charge a flat fee of at least $500 to $1,000.
How do you attach concrete to old concrete?
When using a liquid bonding agent, paint the bonder onto the existing concrete and allow it to dry until it is tacky. This usually takes only a few minutes. Then apply the repair material. Just as in the process described above, after the bonder has become tacky apply a scratch coat and then apply the repair material.